Genel Bakış
The VIOX VRL7E is an electronic Type AC residual current circuit breaker with overcurrent protection for AC 230 V, 50/60 Hz final distribution circuits. Its 1P+N configuration combines residual-current, overload and short-circuit protection in one compact device. The Type AC detection system responds to sinusoidal alternating residual currents, while B and C thermomagnetic tripping characteristics support different circuit and load requirements. The RCBO is intended for residential, commercial and light industrial distribution boards and installs on a standard 35 mm DIN rail.
Özellikler
- Electronic Type AC residual-current detection.
- Residual-current, overload and short-circuit protection.
- 1P+N configuration for AC 230 V circuits.
- B and C thermomagnetic release characteristics.
- 4.5 kA rated short-circuit capacity.
- Entegre hata akımı göstergesi.
- 35 mm DIN-rail mounting with a fast-clip device.
Teknik Özellikler
Elektriksel Veriler
| Parametre | Şartname |
|---|---|
| Operating Mode | Electronic type |
| Anma Akımı | 2, 4, 6, 10, 16, 20, 25, 32, 40 A |
| Kutup Konfigürasyonu | 1P+N |
| Nominal Çalışma Gerilimi | 230 V AC |
| Nominal Frekans | 50/60 Hz |
| Nominal İzolasyon Gerilimi | 250 V |
| Anma Darbe Dayanım Gerilimi | 4 kV, 1.2/50 μs |
| Dielektrik Test Voltajı | 1 dakika boyunca 2 kV |
Koruma Verileri
| Parametre | Şartname |
|---|---|
| Artık Akım Tipi | Tip AC |
| Thermomagnetic Release Characteristic | B, C |
| Anma Artık Çalışma Akımı | 10, 30, 100 mA |
| Nominal Artık Açma ve Kapama Kapasitesi | 500 A |
| Rated Short-Circuit Capacity | 4.5 kA |
| Break Time at IΔn | ≤ 0.1 s |
| Kirlilik Derecesi | 2 |
Mekanik ve Kurulum Verileri
| Parametre | Şartname |
|---|---|
| Elektriksel Yaşam | 4.000 operasyon |
| Mekanik Ömür | 10.000 işlem |
| Fault-Current Indicator | Evet |
| Koruma Derecesi | IP20 |
| Terminal Connection | Cable / pin-type busbar / U-type busbar |
| Cable Terminal Capacity | 25 mm², AWG 18-5, top/bottom |
| Busbar Terminal Capacity | 25 mm², AWG 18-3, top/bottom |
| Montaj | 35 mm DIN rail to EN 60715; fast-clip device |
| Supply Connection | From top |
Environmental Data
| Parametre | Şartname |
|---|---|
| Ortam Sıcaklığı | -5 °C to +40 °C; daily average ≤ 35 °C |
| Depolama Sıcaklığı | -25 °C to +70 °C |
Standart
| Parametre | Şartname |
|---|---|
| Standart | IEC/EN 61009-1 |
Seçim Rehberi
| Kod Elemanı | Anlamı | Mevcut Değerler |
|---|---|---|
| V | VIOX işletme tanımlaması | V |
| RL | RCBO ürün ailesi | RL |
| 7E | Tasarım serisi | 7E |
| Eğri | Aşırı akım açma eğrisi | B veya C |
| Güncel | Nominal akım | 2-40 A |
| Hassasiyet | Anma kaçak çalışma akımı | 10, 30 or 100 mA |
| Kutuplar | Ordering designation | 2P in the catalog example |
| Example Model | Konfigürasyon |
|---|---|
| VRL7E-B16-10 | B curve, 16 A, 10 mA |
| VRL7E-C20-30 | C curve, 20 A, 30 mA |
| VRL7E-C40-100 | C curve, 40 A, 100 mA |
Gezinme Eğrisi
Select a B or C thermomagnetic release characteristic according to the circuit and load requirements.
Anma Akımı
Select one of the listed ratings from 2 A to 40 A.
Artık Hassasiyet
Select a rated residual operating current of 10, 30 or 100 mA.
Devre Yapılandırması
The technical specification identifies a 1P+N configuration for AC 230 V final distribution circuits.
Gezi Eğrileri
The VRL7E is available with B and C time-current tripping characteristics. The catalog provides time-current graphs for both curves and specifies a residual-current break time of no more than 0.1 seconds at IΔn.
| Protection Characteristic | Available Option |
|---|---|
| Thermomagnetic Release | B or C curve |
| Residual-Current Break Time | ≤ 0.1 s at IΔn |
Boyutlar
Uygulamalar
- Residential final distribution boards.
- Commercial final distribution circuits.
- Light industrial distribution boards.
- AC 230 V circuits requiring combined Type AC residual-current and overcurrent protection.
Kurulum
- Install on a 35 mm DIN rail conforming to EN 60715 using the fast-clip device.
- Connect the supply from the top.
- Use cable, pin-type busbar or U-type busbar connections as specified.
- Observe the stated 25 mm² terminal capacity for cable and busbar connections.
- Install within the specified ambient temperature range of -5 °C to +40 °C.
SSS
What residual-current type does the VRL7E use?
It uses electronic Type AC detection for sinusoidal alternating residual currents.
Hangi In değerleri mevcuttur?
The available ratings are 2, 4, 6, 10, 16, 20, 25, 32 and 40 A.
Which residual-current sensitivities are available?
The available rated residual operating currents are 10, 30 and 100 mA.
What is the VRL7E short-circuit capacity?
The rated short-circuit capacity is 4.5 kA.
How is the VRL7E installed?
It mounts on a 35 mm DIN rail conforming to EN 60715 and uses a fast-clip device. The supply connection is from the top.
