Residual Current Circuit Breakers (RCCB)
Compare VIOX RCCB series by rated current, pole configuration, rated residual operating current and waveform type for low-voltage earth-leakage protection.
Koruma fonksiyonuResidual-current detection
Kutup seçenekleri2P and 4P by series
HassasiyetConfirm IΔn by model
RCCB tipiMatch load waveforms
What is a residual current circuit breaker?
An RCCB monitors the balance between current flowing through the outgoing and returning conductors. When the residual current exceeds the device operating characteristics, it disconnects the circuit to support earth-leakage protection.
An RCCB is not selected by rated current alone. Pole configuration, rated residual operating current, RCCB type, circuit voltage and coordination with overload and short-circuit protection must also match the installation.
RCCB Series Overview
Ürün verilerinde halihazırda mevcut olan gerçekleri kullanarak yayınlanmış VIOX modellerini karşılaştırın.
VIOX VKL11F
Kaçak akım koruma rölesi- Kutuplar
- 2P
VIOX VKL11F
Kaçak akım koruma rölesi- Kutuplar
- 4P
VIOX VRC1-125-B
Kaçak akım koruma rölesi- Kutuplar
- 2P
- Nominal akım
- 100A
VIOX VRC3-63
Kaçak akım koruma rölesi- Kutuplar
- 2P
- Nominal akım
- 25A
VIOX VKL11
Kaçak akım koruma rölesi- Kutuplar
- 2P
VIOX VKL11
Kaçak akım koruma rölesi- Kutuplar
- 4P
VIOX VKL11
Kaçak akım koruma rölesi- Kutuplar
- 2P
- RCCB tipi
- A Tipi
VIOX VKL11
Kaçak akım koruma rölesi- Kutuplar
- 4P
- RCCB tipi
- A Tipi
How to choose an RCCB
Use these checkpoints for preliminary comparison, then verify the exact model documentation and installation requirements.
Rated residual current
Match IΔn to the protection objective and applicable installation requirements.
RCCB waveform type
Choose Type AC, A, F, B or another available type according to the connected loads and standards.
Kutup konfigürasyonu
Confirm the required 2P or 4P arrangement, circuit voltage and neutral configuration.
Aşırı akım koordinasyonu
Coordinate the RCCB with the required MCB, fuse or other overcurrent protective device.
RCCB waveform types
Type availability varies by VIOX series. Confirm the product datasheet and applicable installation standard before selection.
Compare published RCCB series
Boş hücreler, değerin mevcut ürün özetinde bulunmadığı anlamına gelir. Şartname öncesinde model sayfasını açın veya veri sayfasını talep edin.
| Seri | Kutuplar | Nominal akım | RCCB tipi | Hassasiyet |
|---|---|---|---|---|
| VIOX VKL11F | 2P | — | — | — |
| VIOX VKL11F | 4P | — | — | — |
| VIOX VRC1-125-B | 2P | 100A | — | — |
| VIOX VRC3-63 | 2P | 25A | — | — |
| VIOX VKL11 | 2P | — | — | — |
| VIOX VKL11 | 4P | — | — | — |
| VIOX VKL11 | 2P | — | A Tipi | — |
| VIOX VKL11 | 4P | — | A Tipi | — |
RCCB applications
Typical environments where the correct residual-current protection characteristics must be verified.
Konut Binaları
Residual-current protection for final circuits and residential distribution boards.
Endüstriyel Otomasyon
Appropriately selected RCCB types for electronic loads, drives and control-system supply circuits.
Güneş Enerjisi ve Enerji Depolama
Residual-current protection coordinated with inverter and power-conversion equipment.
RCCB Knowledge & Selection Guides
Tüm makaleler
RCCB selection questions
Quick answers for comparing a residual-current protection family before detailed circuit verification.
Bir RCCB neye karşı koruma sağlar?
An RCCB detects an imbalance between outgoing and returning current and disconnects the circuit when the residual current exceeds its operating characteristics. It is used for earth-leakage protection in an appropriately designed installation.
Does an RCCB provide overload and short-circuit protection?
An RCCB is selected for residual-current protection and does not normally replace overcurrent protection. The circuit may also require an MCB, fuse or a combined RCBO according to the installation design.
What is the difference between Type AC, A, F and B RCCBs?
The type identifies the residual-current waveforms the device is designed to detect. The correct type depends on the connected equipment, applicable standards and manufacturer documentation; availability varies by VIOX series.
How should RCCB sensitivity be selected?
The rated residual operating current must match the protection objective and the applicable installation rules. Confirm the required sensitivity on the individual model page or datasheet before specification.
Can an RCCB be selected by rated current alone?
No. Rated current, pole configuration, rated residual operating current, RCCB type, circuit voltage and coordination with overcurrent protection must all be checked.
Need the Right RCCB?
Birlikte doğrulayalım.
Send the circuit voltage, rated current, pole configuration, required sensitivity, connected loads, quantity and target market. VIOX will help identify the most relevant published series.
Request RCCB Support