Panel Building & Low-Voltage Power Distribution

Organize incoming conductors, main distribution, branch protection, modular mounting and outgoing terminals around one clear switchboard architecture.

Explore the panel architecture View components

Low-voltage switchgear and electrical distribution panel room — Low-voltage switchboard application

Follow the current path through the panel.

Start with the electrical system, then assign distribution, protection, mounting and termination functions to defined panel zones. Device compatibility and complete-assembly performance must be verified for the actual switchboard.

ການສະຫນອງຂາເຂົ້າSystem voltage, current and fault level
Split conductorsຕັນກະຈາຍພະລັງງານ
ການແຈກຢາຍຫຼັກBusbar and pan assemblies
Protect branchesMCB, RCCB or RCBO section
TerminateDIN-rail terminal section
Outgoing circuitsLoads, subpanels and control circuits

ການຕິດຕັ້ງເທິງຮາງ DIN-railProfile, material and mounting length Busbar supportDimensions, insulation and mechanical fit Neutral & earth organizationSeparate conductor destinations and bar layout Connection interfacesTerminal, conductor and busbar compatibility

Conceptual architecture—not a wiring diagram or an IEC 61439 assembly verification. The panel builder remains responsible for the complete design, protection coordination, temperature-rise assessment, short-circuit performance, clearances and applicable documentation.

Give every panel zone a defined job.

A serviceable panel separates functions clearly. The exact arrangement varies, but each zone should make the current path, conductor destination and maintenance boundary understandable.

Incoming & main device zone: Confirm supply, rated current, fault level, isolation method and the cable-entry or main-terminal arrangement.
Main distribution zone: Choose the busbar or distribution-block architecture, conductor material and cross-section, spacing and support method.
Branch protection zone: Coordinate protective-device ratings, pole arrangement, neutral treatment, terminal geometry and compatible busbar feed.
Terminal & outgoing zone: Separate power, control, neutral and protective conductors with clear destinations, marking and service access.

Panel-building components by function

Use the product records to shortlist a component, then confirm its exact dimensions, conductor range, ratings, accessories and documents against the panel design.

ການແຈກຢາຍຫຼັກ

VIOX Busbar Pan ສະພາແຫ່ງ

Supports organized three-phase distribution and breaker mounting within the declared assembly configuration.

ເບິ່ງສິນຄ້າ

Conductor splitting

ຕັນການກະຈາຍພະລັງງານ UKK

Distributes one incoming conductor to multiple outgoing conductors in a compact insulated block.

ເບິ່ງສິນຄ້າ

Busbar connection

MCB Bus Bar Connector TB25-6

Connects conductors to an MCB busbar arrangement where the exact terminal and bar geometry are compatible.

ເບິ່ງສິນຄ້າ

Modular mounting

VIOX Steel & Aluminum Din Rails

Provides steel or aluminum mounting profiles for compatible DIN-rail components.

ເບິ່ງສິນຄ້າ

Outgoing termination

ກ່ອງເຊື່ອມຕໍ່ແບບລາງລົດໄຟ UTJ5 Series | ບລັອກຕໍ່ສາຍໄຟ DIN Rail ທີ່ມີກະແສໄຟຟ້າສູງ | VIOX

Organizes higher-current conductor connections on a DIN-rail terminal platform.

ເບິ່ງສິນຄ້າ

Busbar support

SM Series Busbar Insulator

Provides insulated mechanical support for a busbar installation within its declared ratings and dimensions.

ເບິ່ງສິນຄ້າ

ຕັນກະຈາຍພະລັງງານ MCB busbars ລາງລົດໄຟ DIN ຕັນ terminal

Build a panel-component specification.

Share confirmed values and mark unknown items for review. Panel type alone is not enough to select the current-carrying, protective and mounting components.

Ask VIOX to review the component list

ຢືນຢັນ	What it decides
ລະບົບໄຟຟ້າ	Voltage, frequency, phases, earthing arrangement and available fault current.
ເສັ້ນທາງກະແສ	Incoming and outgoing currents, number of branches and required distribution architecture.
ຕົວນໍາ	Copper or aluminum, cross-section, termination method and cable-entry direction.
ການປົກປ້ອງ	Device type, rated current, trip or residual-current characteristics and short-circuit ratings.
Mechanical layout	Enclosure dimensions, DIN-rail profile, busbar supports, clearances and service access.
Order & documents	Quantity, target market, marking, packaging, drawings and model-specific documentation.

Panel distribution design guides

Resolve component boundaries and compatibility questions before freezing the layout or sending an order specification.

ບລັອກການແຈກຢາຍພະລັງງານUnderstand functions, types and the inputs needed for selection. Circuit Breaker BusbarsReview busbar formats, selection boundaries and installation checks. DIN Rail SelectionCompare rail profiles, dimensions, materials and mounting needs. Terminal Block SelectionMatch conductor, current, voltage and connection method to the circuit. Busbar Insulator SelectionCheck electrical, dimensional, mechanical and environmental inputs. Neutral Bar vs Ground BarKeep neutral and protective conductor functions distinct.

Building a low-voltage panel?

Share the single-line concept, system ratings, conductor sizes, panel layout, product quantities and destination market with VIOX.

Build Your Panel Component Request