VIOX Electric
Language

Leading Terminal Block Manufacturer & Supplier

Source VIOX DIN rail, barrier and plastic terminal block families for organized conductor termination, control wiring and power distribution assemblies.

DIN rail terminalsMRK, UK, SAK/JXB, ST and PT families

Barrier terminalsCM1, TK, TB, TC, TD and IN series

Plastic strips8T, H, LT and U formats

Complete systemMarkers, jumpers, end stops and rail accessories

VIOX Terminal Block SERIES公開製品ラインナップ

What is a terminal block?

A terminal block provides an organized, serviceable connection point between conductors in an electrical panel, enclosure or equipment assembly. Designs vary by connection method, mounting system, conductor capacity and circuit function.

The exact terminal must be matched to conductor type and size, electrical ratings, insulation requirements, pitch, number of poles or levels, mounting method, accessories and the applicable installation standard.

Prepare conductorsConfirm conductor type, cross-section, stripping and ferrule requirements.
Make the connectionUse the specified connection method and tightening or insertion procedure.
Complete the assemblyAdd markers, end stops, covers, jumpers and testing points where required.

VIOX 端子台製品ラインナップ

Browse the same three terminal block families presented on the original VIOX page, now organized in the new site system.

How to choose a terminal block

Start with conductor and circuit data, then confirm connection technology and panel integration.

Conductor type and size

Confirm solid, stranded or ferruled conductors and the published connection range.

電気的定格

Verify rated current, voltage, impulse and insulation data for the intended circuit.

Connection and circuit function

Select feed-through, distribution, grounding, disconnect or another required function.

Mounting and accessories

Check rail or panel mounting, pitch, markers, covers, jumpers and end stops.

Specify the complete terminal system

Terminal blocks, conductors, accessories and mounting hardware must be coordinated as one panel assembly.

CConductor preparation and connection range
TTerminal function and electrical duty
AAccessories, marking and mounting
Read the Terminal Block selection guide

Compare published Terminal Block series

空欄は、現在の製品概要において値が利用できないことを示します。仕様を決定する前に、モデルページを開くか、データシートを請求してください。.

シリーズ接続Conductor range定格電流Pitch / poles
MRK端子ブロック
UKターミナルブロック
SJ端子台
SAK/JXB端子台
ST端子台
PT Terminal Block
TBD端子台
CM1 ターミナルストリップ
TK端子台
TB端子台
TC端子台
TD端子台
IN端子台
8T端子台
H Type Terminal Block (12 Pole)
LTタイプ端子台
U Type Terminal Block

Terminal Block Selection Questions

詳細な回路検証を行う前の、製品ファミリーの予備比較のためのクイックアンサー。.

How is terminal block size selected?

Match the actual conductor construction and cross-section to the published connection range, then verify circuit current, voltage and insulation requirements.

What is the difference between screw, spring and push-in terminals?

They use different conductor-retention methods and installation procedures. Compare conductor compatibility, maintenance, vibration, wiring speed and product data.

Can terminal blocks be bridged together?

Only use jumpers or bridges approved for the selected terminal series and verify the resulting current distribution.

Which accessories are normally required?

The assembly may require end stops, end plates, markers, covers, separators, jumpers or test accessories depending on the series and panel design.

Why do terminal connections overheat?

Common causes include incorrect conductor preparation, loose or unsuitable connections, overload, contamination and poor installation. Follow the product instructions and inspect the complete circuit.

Need the Right Terminal Block?
Let’s Build the Connection System.

Send the conductor type and size, circuit ratings, connection method, mounting, accessories, quantity and target market. VIOX will help identify the relevant published series.

Request Terminal Block Support