Industrial Automation & Control Components
Organize sensing, timing, switching, protection and panel-control components around the operating sequence of industrial machinery.
From process signal to machine action.
Industrial control components perform different jobs in one operating sequence. The system designer defines the controller logic; surrounding devices sense conditions, manage timing, switch loads and protect the circuit.
Switch the motor circuit.
VIOX CJX2-2510 ACコンタクタ
A contactor operates the load in response to the control circuit. Confirm motor duty, utilization category, coil voltage and switching frequency, together with coordinated overload and short-circuit protection.
製品を見る
Detect the machine position.
CM30-3010NA 静電容量式近接センサ
A proximity sensor provides a process input to the controller. Match the target material, sensing distance, supply voltage and output type to the machine and controller input.
製品を見る
Define when the action happens.
VIOX FCT18-AgR 制御信号付パルス遅延タイマリレー
A timer relay introduces the required delay or timed operation. Confirm operating mode, trigger, reset behavior, time range and output contact duty. Machine interlocks remain part of the control-system design.
製品を見る
Manage cabinet conditions.
NTS01/NTS10 DINレールサーモスタット
A cabinet thermostat can control the selected heating or cooling arrangement. Confirm its switching function, temperature range and contact rating against the connected equipment.
製品を見るConceptual control sequence, not a wiring diagram. Device ratings, interlocking, protective coordination and controller logic must be defined for the actual machine.
Match components to the control task.
Start from what the machine must detect and operate. Then confirm the electrical ratings, control method, duty and environment for every selected device.
- Motors, pumps & fans
- Define motor data, starting method, switching duty and the required overload and short-circuit protection.
- Conveyors & packaging sequences
- Map sensing points, sequence timing, interlocks and the loads operated at each stage.
- HVAC & compressor control
- Confirm contactor duty, control voltage, restart behavior and equipment-manufacturer requirements.
- Position, level & presence sensing
- Confirm target material, sensing distance, supply, output type and the controller input interface.
- Timed machine functions
- Specify the operating mode, trigger method, time range, reset behavior and output contact duty.
- Control-cabinet conditions
- Define the temperature range, heating or cooling function, enclosure conditions and controlled equipment.
Industrial control components
Compare VIOX products for sensing, timed control, load switching and panel temperature control. Open each product page to confirm its exact ratings, configuration and available documents.
プロセスセンシングCM30-3010NA 静電容量式近接センサ
製品を見る →タイミング制御VIOX FCT18-AgR 制御信号付パルス遅延タイマリレー
製品を見る →負荷スイッチングVIOX CJX2-2510 ACコンタクタ
製品を見る →Panel temperature controlNTS01/NTS10 DINレールサーモスタット
製品を見る →Prepare the control-panel specification.
Send confirmed information where available. Mark unknown values for engineering review instead of selecting a component from the application name alone.
- Electrical supply
- Power voltage, frequency, phases and available fault level.
- 制御回路
- Control voltage, signal type and controller interface.
- Load & duty
- Load type, rated current or motor power, duty cycle and switching frequency.
- Operating sequence
- Inputs, outputs, timing, reset behavior and interlocking requirements.
- 検知
- Target, sensing distance, environment and required sensor output.
- Panel & order
- DIN-rail space, temperature, quantity, destination market and required documents.
産業用制御盤を構築中ですか？
Share the load, control voltage, operating sequence, sensing requirements and order scope with VIOX.