Industrial Sensor Manufacturer
Compare VIOX proximity, photoelectric, capacitive, ultrasonic, Hall and color-mark sensor series for industrial detection and automation.
検出原理Match target and environment
Electrical outputNPN, PNP or published type
Detection geometryDistance, target and mounting
Housing and connectionSize, cable and connector
What is an industrial sensor?
An industrial sensor detects a physical target, position, color, distance, field or other condition and converts it into an electrical signal for a controller or machine circuit.
Selection requires sensing principle, target material and size, sensing distance, supply, output logic, switching behavior, response, housing, mounting, connection and environmental conditions.
Sensor Series Overview
製品データで既に入手可能な事実を使用して、公開されているVIOXモデルを比較してください。.
VIOX 15MM
Industrial sensing deviceモデルデータの確認VIOX 15MM
Industrial sensing deviceモデルデータの確認VIOX 15MM
Industrial sensing deviceモデルデータの確認VIOX 15MM
Industrial sensing deviceモデルデータの確認
VIOX 15MM
Industrial sensing deviceモデルデータの確認
VIOX 15MM
Industrial sensing deviceモデルデータの確認
VIOX 15MM
Industrial sensing deviceモデルデータの確認
近接センサーマウントを購入する
Industrial sensing deviceモデルデータの確認How to choose an industrial sensor
Start with the target and detection task, then match electrical interface, housing and environment.
Target and sensing principle
Match inductive, capacitive, photoelectric, ultrasonic, Hall or color sensing to the material and task.
Distance and geometry
Confirm target size, approach direction, mounting clearance and published sensing range.
Supply and output
Match voltage, NPN or PNP logic, normally open or closed state and controller input.
Housing and environment
Check dimensions, connection, shielding, temperature, dust, water, vibration and interference.
Define the detection task before the model
Target properties and electrical interface determine the sensing technology and model.
Sensor Knowledge & Selection Guides
すべての記事
Sensor Selection Questions
詳細な回路検証を行う前の、製品ファミリーの予備比較のためのクイックアンサー。.
Which sensing principle should be used?
Choose from target material, distance, background, contamination, environment, speed and mounting constraints.
What is the difference between NPN and PNP outputs?
They use different current-switching conventions and must match the controller input architecture and wiring.
Is nominal sensing distance always the usable distance?
No. Target material, size, mounting, tolerances and environment affect the assured operating range.
How should normally open or closed output be selected?
Use the machine control logic, diagnostic behavior and risk assessment, then verify the exact sensor wiring.
Which environmental data should be checked?
Review temperature, protection, vibration, chemicals, electromagnetic conditions, cable and mounting requirements.
Need the Right Industrial Sensor?
Let’s Define the Detection Task.
Send the target material and size, sensing distance, supply, output logic, housing, connection, environment and quantity.
Request Sensor Support