VIOX Electric
Language

Leading Terminal Block Manufacturer & Supplier

Source VIOX DIN rail, barrier and plastic terminal block families for organized conductor termination, control wiring and power distribution assemblies.

DIN rail terminalsMRK, UK, SAK/JXB, ST and PT families

Barrier terminalsCM1, TK, TB, TC, TD and IN series

Plastic strips8T, H, LT and U formats

Complete systemMarkers, jumpers, end stops and rail accessories

VIOX Terminal Block SERIES출시된 제품군

What is a terminal block?

A terminal block provides an organized, serviceable connection point between conductors in an electrical panel, enclosure or equipment assembly. Designs vary by connection method, mounting system, conductor capacity and circuit function.

The exact terminal must be matched to conductor type and size, electrical ratings, insulation requirements, pitch, number of poles or levels, mounting method, accessories and the applicable installation standard.

Prepare conductorsConfirm conductor type, cross-section, stripping and ferrule requirements.
Make the connectionUse the specified connection method and tightening or insertion procedure.
Complete the assemblyAdd markers, end stops, covers, jumpers and testing points where required.

VIOX 단자대 제품군

Browse the same three terminal block families presented on the original VIOX page, now organized in the new site system.

How to choose a terminal block

Start with conductor and circuit data, then confirm connection technology and panel integration.

Conductor type and size

Confirm solid, stranded or ferruled conductors and the published connection range.

전기 등급

Verify rated current, voltage, impulse and insulation data for the intended circuit.

Connection and circuit function

Select feed-through, distribution, grounding, disconnect or another required function.

Mounting and accessories

Check rail or panel mounting, pitch, markers, covers, jumpers and end stops.

Specify the complete terminal system

Terminal blocks, conductors, accessories and mounting hardware must be coordinated as one panel assembly.

CConductor preparation and connection range
TTerminal function and electrical duty
AAccessories, marking and mounting
Read the Terminal Block selection guide

Compare published Terminal Block series

빈 셀은 현재 제품 요약에서 해당 값을 사용할 수 없음을 의미합니다. 사양을 확인하기 전에 모델 페이지를 열거나 데이터시트를 요청하십시오.

시리즈연결Conductor range정격 전류Pitch / poles
MRK 터미널 블록
영국 터미널 블록
SJ 터미널 블록
SAK/JXB 터미널 블록
ST 터미널 블록
PT Terminal Block
미정 터미널 블록
CM1 터미널 스트립
TK 터미널 블록
TB 터미널 블록
TC 터미널 블록
TD 터미널 블록
IN 단자대
8T 터미널 블록
H Type Terminal Block (12 Pole)
LT 타입 터미널 블록
U Type Terminal Block

Terminal Block Selection Questions

상세 회로 검증 전 제품군 비교를 위한 빠른 답변.

How is terminal block size selected?

Match the actual conductor construction and cross-section to the published connection range, then verify circuit current, voltage and insulation requirements.

What is the difference between screw, spring and push-in terminals?

They use different conductor-retention methods and installation procedures. Compare conductor compatibility, maintenance, vibration, wiring speed and product data.

Can terminal blocks be bridged together?

Only use jumpers or bridges approved for the selected terminal series and verify the resulting current distribution.

Which accessories are normally required?

The assembly may require end stops, end plates, markers, covers, separators, jumpers or test accessories depending on the series and panel design.

Why do terminal connections overheat?

Common causes include incorrect conductor preparation, loose or unsuitable connections, overload, contamination and poor installation. Follow the product instructions and inspect the complete circuit.

Need the Right Terminal Block?
Let’s Build the Connection System.

Send the conductor type and size, circuit ratings, connection method, mounting, accessories, quantity and target market. VIOX will help identify the relevant published series.

Request Terminal Block Support