Industrial Sensor Manufacturer
Compare VIOX proximity, photoelectric, capacitive, ultrasonic, Hall and color-mark sensor series for industrial detection and automation.
감지 원리Match target and environment
Electrical outputNPN, PNP or published type
Detection geometryDistance, target and mounting
Housing and connectionSize, cable and connector
What is an industrial sensor?
An industrial sensor detects a physical target, position, color, distance, field or other condition and converts it into an electrical signal for a controller or machine circuit.
Selection requires sensing principle, target material and size, sensing distance, supply, output logic, switching behavior, response, housing, mounting, connection and environmental conditions.
Sensor Series Overview
제품 데이터에 이미 제공된 사실을 사용하여 게시된 VIOX 모델을 비교하십시오.
VIOX 15MM
Industrial sensing device모델 데이터 검토VIOX 15MM
Industrial sensing device모델 데이터 검토VIOX 15MM
Industrial sensing device모델 데이터 검토VIOX 15MM
Industrial sensing device모델 데이터 검토
VIOX 15MM
Industrial sensing device모델 데이터 검토
VIOX 15MM
Industrial sensing device모델 데이터 검토
VIOX 15MM
Industrial sensing device모델 데이터 검토
근접 센서 마운트 구매
Industrial sensing device모델 데이터 검토How to choose an industrial sensor
Start with the target and detection task, then match electrical interface, housing and environment.
Target and sensing principle
Match inductive, capacitive, photoelectric, ultrasonic, Hall or color sensing to the material and task.
Distance and geometry
Confirm target size, approach direction, mounting clearance and published sensing range.
Supply and output
Match voltage, NPN or PNP logic, normally open or closed state and controller input.
Housing and environment
Check dimensions, connection, shielding, temperature, dust, water, vibration and interference.
Define the detection task before the model
Target properties and electrical interface determine the sensing technology and model.
Sensor Knowledge & Selection Guides
모든 게시물
Sensor Selection Questions
상세 회로 검증 전 제품군 비교를 위한 빠른 답변.
Which sensing principle should be used?
Choose from target material, distance, background, contamination, environment, speed and mounting constraints.
What is the difference between NPN and PNP outputs?
They use different current-switching conventions and must match the controller input architecture and wiring.
Is nominal sensing distance always the usable distance?
No. Target material, size, mounting, tolerances and environment affect the assured operating range.
How should normally open or closed output be selected?
Use the machine control logic, diagnostic behavior and risk assessment, then verify the exact sensor wiring.
Which environmental data should be checked?
Review temperature, protection, vibration, chemicals, electromagnetic conditions, cable and mounting requirements.
Need the Right Industrial Sensor?
Let’s Define the Detection Task.
Send the target material and size, sensing distance, supply, output logic, housing, connection, environment and quantity.
Request Sensor Support