Industrial Sensor Manufacturer
Compare VIOX proximity, photoelectric, capacitive, ultrasonic, Hall and color-mark sensor series for industrial detection and automation.
Principe de détectionMatch target and environment
Electrical outputNPN, PNP or published type
Detection geometryDistance, target and mounting
Housing and connectionSize, cable and connector
What is an industrial sensor?
An industrial sensor detects a physical target, position, color, distance, field or other condition and converts it into an electrical signal for a controller or machine circuit.
Selection requires sensing principle, target material and size, sensing distance, supply, output logic, switching behavior, response, housing, mounting, connection and environmental conditions.
Sensor Series Overview
Comparer les modèles VIOX publiés en utilisant les faits déjà disponibles dans les données produit.
VIOX 15MM
Industrial sensing deviceExaminer les données du modèleVIOX 15MM
Industrial sensing deviceExaminer les données du modèleVIOX 15MM
Industrial sensing deviceExaminer les données du modèleVIOX 15MM
Industrial sensing deviceExaminer les données du modèle
VIOX 15MM
Industrial sensing deviceExaminer les données du modèle
VIOX 15MM
Industrial sensing deviceExaminer les données du modèle
VIOX 15MM
Industrial sensing deviceExaminer les données du modèle
Acheter un support pour capteur de proximité
Industrial sensing deviceExaminer les données du modèleHow to choose an industrial sensor
Start with the target and detection task, then match electrical interface, housing and environment.
Target and sensing principle
Match inductive, capacitive, photoelectric, ultrasonic, Hall or color sensing to the material and task.
Distance and geometry
Confirm target size, approach direction, mounting clearance and published sensing range.
Supply and output
Match voltage, NPN or PNP logic, normally open or closed state and controller input.
Housing and environment
Check dimensions, connection, shielding, temperature, dust, water, vibration and interference.
Define the detection task before the model
Target properties and electrical interface determine the sensing technology and model.
Compare published Sensor series
Les cellules vides signifient que la valeur n'est pas disponible dans le résumé actuel du produit. Ouvrez la page du modèle ou demandez sa fiche technique avant toute spécification.
Sensor Applications
Environnements typiques où les caractéristiques exactes du produit doivent être vérifiées.
Sensor Knowledge & Selection Guides
Tous les articles
Sensor Selection Questions
Réponses rapides pour une comparaison préliminaire des gammes de produits avant la vérification détaillée des circuits.
Which sensing principle should be used?
Choose from target material, distance, background, contamination, environment, speed and mounting constraints.
What is the difference between NPN and PNP outputs?
They use different current-switching conventions and must match the controller input architecture and wiring.
Is nominal sensing distance always the usable distance?
No. Target material, size, mounting, tolerances and environment affect the assured operating range.
How should normally open or closed output be selected?
Use the machine control logic, diagnostic behavior and risk assessment, then verify the exact sensor wiring.
Which environmental data should be checked?
Review temperature, protection, vibration, chemicals, electromagnetic conditions, cable and mounting requirements.
Need the Right Industrial Sensor?
Let’s Define the Detection Task.
Send the target material and size, sensing distance, supply, output logic, housing, connection, environment and quantity.
Request Sensor Support