Industrial Automation & Control Components
Organize sensing, timing, switching, protection and panel-control components around the operating sequence of industrial machinery.
From process signal to machine action.
Industrial control components perform different jobs in one operating sequence. The system designer defines the controller logic; surrounding devices sense conditions, manage timing, switch loads and protect the circuit.
Switch the motor circuit.
کنتاکتور AC مدل VIOX CJX2-2510
A contactor operates the load in response to the control circuit. Confirm motor duty, utilization category, coil voltage and switching frequency, together with coordinated overload and short-circuit protection.
مشاهده محصول
Detect the machine position.
سنسور مجاورتی خازنی CM30-3010NA
A proximity sensor provides a process input to the controller. Match the target material, sensing distance, supply voltage and output type to the machine and controller input.
مشاهده محصول
Define when the action happens.
رله تایمر تاخیر پالس VIOX FCT18-AgR با سیگنال کنترل
A timer relay introduces the required delay or timed operation. Confirm operating mode, trigger, reset behavior, time range and output contact duty. Machine interlocks remain part of the control-system design.
مشاهده محصول
Manage cabinet conditions.
NTS01/NTS10 Din Rail Thermostat
A cabinet thermostat can control the selected heating or cooling arrangement. Confirm its switching function, temperature range and contact rating against the connected equipment.
مشاهده محصولConceptual control sequence, not a wiring diagram. Device ratings, interlocking, protective coordination and controller logic must be defined for the actual machine.
Match components to the control task.
Start from what the machine must detect and operate. Then confirm the electrical ratings, control method, duty and environment for every selected device.
- Motors, pumps & fans
- Define motor data, starting method, switching duty and the required overload and short-circuit protection.
- Conveyors & packaging sequences
- Map sensing points, sequence timing, interlocks and the loads operated at each stage.
- HVAC & compressor control
- Confirm contactor duty, control voltage, restart behavior and equipment-manufacturer requirements.
- Position, level & presence sensing
- Confirm target material, sensing distance, supply, output type and the controller input interface.
- Timed machine functions
- Specify the operating mode, trigger method, time range, reset behavior and output contact duty.
- Control-cabinet conditions
- Define the temperature range, heating or cooling function, enclosure conditions and controlled equipment.
Industrial control components
Compare VIOX products for sensing, timed control, load switching and panel temperature control. Open each product page to confirm its exact ratings, configuration and available documents.
حسگری فرآیندسنسور مجاورتی خازنی CM30-3010NA
مشاهده محصول →کنترل زمانبندیشدهرله تایمر تاخیر پالس VIOX FCT18-AgR با سیگنال کنترل
مشاهده محصول →سوئیچینگ بارکنتاکتور AC مدل VIOX CJX2-2510
مشاهده محصول →Panel temperature controlNTS01/NTS10 Din Rail Thermostat
مشاهده محصول →Prepare the control-panel specification.
Send confirmed information where available. Mark unknown values for engineering review instead of selecting a component from the application name alone.
- Electrical supply
- Power voltage, frequency, phases and available fault level.
- مدار کنترل
- Control voltage, signal type and controller interface.
- Load & duty
- Load type, rated current or motor power, duty cycle and switching frequency.
- Operating sequence
- Inputs, outputs, timing, reset behavior and interlocking requirements.
- سنجش
- Target, sensing distance, environment and required sensor output.
- Panel & order
- DIN-rail space, temperature, quantity, destination market and required documents.
آیا در حال ساخت یک تابلوی کنترل صنعتی هستید؟
Share the load, control voltage, operating sequence, sensing requirements and order scope with VIOX.