Gambaran keseluruhan
The VIOX VRL7E is an electronic Type AC residual current circuit breaker with overcurrent protection for AC 230 V, 50/60 Hz final distribution circuits. Its 1P+N configuration combines residual-current, overload and short-circuit protection in one compact device. The Type AC detection system responds to sinusoidal alternating residual currents, while B and C thermomagnetic tripping characteristics support different circuit and load requirements. The RCBO is intended for residential, commercial and light industrial distribution boards and installs on a standard 35 mm DIN rail.
Ciri-ciri
- Electronic Type AC residual-current detection.
- Residual-current, overload and short-circuit protection.
- 1P+N configuration for AC 230 V circuits.
- B and C thermomagnetic release characteristics.
- 4.5 kA rated short-circuit capacity.
- Penunjuk arus kerosakan bersepadu.
- 35 mm DIN-rail mounting with a fast-clip device.
Spesifikasi
Data Elektrik
| Parameter | Spesifikasi |
|---|---|
| Operating Mode | Electronic type |
| Nilai Semasa | 2, 4, 6, 10, 16, 20, 25, 32, 40 A |
| Konfigurasi Tiang | 1P+N |
| Voltan Operasi Dinilai | 230 V AC |
| Kekerapan Dinilai | 50/60 Hz |
| Voltan Penebat Terkadar | 250 V |
| Impuls Dinilai Menahan Voltan | 4 kV, 1.2/50 μs |
| Voltan Ujian Dielektrik | 2 kV selama 1 minit |
Data Perlindungan
| Parameter | Spesifikasi |
|---|---|
| Residual-Current Type | Taip AC |
| Thermomagnetic Release Characteristic | B, C |
| Arus kendalian baki berkadar | 10, 30, 100 mA |
| Keupayaan Membuat dan Memutus Arus Baki Terkadar | 500 A |
| Rated Short-Circuit Capacity | 4.5 kA |
| Break Time at IΔn | ≤ 0.1 s |
| Ijazah Pencemaran | 2 |
Data Mekanikal dan Pemasangan
| Parameter | Spesifikasi |
|---|---|
| Kehidupan Elektrik | 4,000 operasi |
| Kehidupan Mekanikal | 10,000 operasi |
| Fault-Current Indicator | Ya |
| Darjah Perlindungan | IP20 |
| Terminal Connection | Cable / pin-type busbar / U-type busbar |
| Cable Terminal Capacity | 25 mm², AWG 18-5, top/bottom |
| Busbar Terminal Capacity | 25 mm², AWG 18-3, top/bottom |
| Melekap | 35 mm DIN rail to EN 60715; fast-clip device |
| Supply Connection | From top |
Environmental Data
| Parameter | Spesifikasi |
|---|---|
| Suhu Ambien | -5 °C to +40 °C; daily average ≤ 35 °C |
| Suhu Penyimpanan | -25 °C to +70 °C |
Standard
| Parameter | Spesifikasi |
|---|---|
| Standard | IEC/EN 61009-1 |
Panduan Pemilihan
| Elemen Kod | Maknanya | Nilai Tersedia |
|---|---|---|
| V | Pengenalan perusahaan VIOX | V |
| RL | Keluarga produk RCBO | RL |
| 7E | Siri reka bentuk | 7E |
| Keluk | Lengkung pelantikan arus lebih | B atau C |
| semasa | Nilai semasa | 2-40 A |
| Sensitiviti | Arus kendalian baki berkadar | 10, 30 or 100 mA |
| Tiang | Ordering designation | 2P in the catalog example |
| Example Model | Konfigurasi |
|---|---|
| VRL7E-B16-10 | B curve, 16 A, 10 mA |
| VRL7E-C20-30 | C curve, 20 A, 30 mA |
| VRL7E-C40-100 | C curve, 40 A, 100 mA |
Keluk tersandung
Select a B or C thermomagnetic release characteristic according to the circuit and load requirements.
Nilai Semasa
Select one of the listed ratings from 2 A to 40 A.
Kepekaan Baki
Select a rated residual operating current of 10, 30 or 100 mA.
Konfigurasi Litar
The technical specification identifies a 1P+N configuration for AC 230 V final distribution circuits.
Keluk Perjalanan
The VRL7E is available with B and C time-current tripping characteristics. The catalog provides time-current graphs for both curves and specifies a residual-current break time of no more than 0.1 seconds at IΔn.
| Protection Characteristic | Available Option |
|---|---|
| Thermomagnetic Release | B or C curve |
| Residual-Current Break Time | ≤ 0.1 s at IΔn |
Dimensi
Aplikasi
- Residential final distribution boards.
- Commercial final distribution circuits.
- Light industrial distribution boards.
- AC 230 V circuits requiring combined Type AC residual-current and overcurrent protection.
Pemasangan
- Install on a 35 mm DIN rail conforming to EN 60715 using the fast-clip device.
- Connect the supply from the top.
- Use cable, pin-type busbar or U-type busbar connections as specified.
- Observe the stated 25 mm² terminal capacity for cable and busbar connections.
- Install within the specified ambient temperature range of -5 °C to +40 °C.
Soalan Lazim
What residual-current type does the VRL7E use?
It uses electronic Type AC detection for sinusoidal alternating residual currents.
Apakah arus berkadar yang tersedia?
The available ratings are 2, 4, 6, 10, 16, 20, 25, 32 and 40 A.
Which residual-current sensitivities are available?
The available rated residual operating currents are 10, 30 and 100 mA.
What is the VRL7E short-circuit capacity?
The rated short-circuit capacity is 4.5 kA.
How is the VRL7E installed?
It mounts on a 35 mm DIN rail conforming to EN 60715 and uses a fast-clip device. The supply connection is from the top.
