Industrial Automation & Control Components
Organize sensing, timing, switching, protection and panel-control components around the operating sequence of industrial machinery.
From process signal to machine action.
Industrial control components perform different jobs in one operating sequence. The system designer defines the controller logic; surrounding devices sense conditions, manage timing, switch loads and protect the circuit.
Switch the motor circuit.
VIOX CJX2-2510 AC Contactor
A contactor operates the load in response to the control circuit. Confirm motor duty, utilization category, coil voltage and switching frequency, together with coordinated overload and short-circuit protection.
ເບິ່ງສິນຄ້າ
Detect the machine position.
CM30-3010NA Capacitive Proximity Sensor
A proximity sensor provides a process input to the controller. Match the target material, sensing distance, supply voltage and output type to the machine and controller input.
ເບິ່ງສິນຄ້າ
Define when the action happens.
VIOX FCT18-AgR Pulse Delayed Timer Relay ທີ່ມີສັນຍານຄວບຄຸມ
A timer relay introduces the required delay or timed operation. Confirm operating mode, trigger, reset behavior, time range and output contact duty. Machine interlocks remain part of the control-system design.
ເບິ່ງສິນຄ້າ
Manage cabinet conditions.
ເຄື່ອງຄວບຄຸມອຸນຫະພູມราง DIN NTS01/NTS10
A cabinet thermostat can control the selected heating or cooling arrangement. Confirm its switching function, temperature range and contact rating against the connected equipment.
ເບິ່ງສິນຄ້າConceptual control sequence, not a wiring diagram. Device ratings, interlocking, protective coordination and controller logic must be defined for the actual machine.
Match components to the control task.
Start from what the machine must detect and operate. Then confirm the electrical ratings, control method, duty and environment for every selected device.
- Motors, pumps & fans
- Define motor data, starting method, switching duty and the required overload and short-circuit protection.
- Conveyors & packaging sequences
- Map sensing points, sequence timing, interlocks and the loads operated at each stage.
- HVAC & compressor control
- Confirm contactor duty, control voltage, restart behavior and equipment-manufacturer requirements.
- Position, level & presence sensing
- Confirm target material, sensing distance, supply, output type and the controller input interface.
- Timed machine functions
- Specify the operating mode, trigger method, time range, reset behavior and output contact duty.
- Control-cabinet conditions
- Define the temperature range, heating or cooling function, enclosure conditions and controlled equipment.
Industrial control components
Compare VIOX products for sensing, timed control, load switching and panel temperature control. Open each product page to confirm its exact ratings, configuration and available documents.
ການກວດຈັບຂະບວນການCM30-3010NA Capacitive Proximity Sensor
ເບິ່ງສິນຄ້າ →ການຄວບຄຸມດ້ວຍເວລາVIOX FCT18-AgR Pulse Delayed Timer Relay ທີ່ມີສັນຍານຄວບຄຸມ
ເບິ່ງສິນຄ້າ →ການປ່ຽນໂຫຼດVIOX CJX2-2510 AC Contactor
ເບິ່ງສິນຄ້າ →Panel temperature controlເຄື່ອງຄວບຄຸມອຸນຫະພູມราง DIN NTS01/NTS10
ເບິ່ງສິນຄ້າ →Prepare the control-panel specification.
Send confirmed information where available. Mark unknown values for engineering review instead of selecting a component from the application name alone.
- Electrical supply
- Power voltage, frequency, phases and available fault level.
- ວົງຈອນຄວບຄຸມ
- Control voltage, signal type and controller interface.
- Load & duty
- Load type, rated current or motor power, duty cycle and switching frequency.
- Operating sequence
- Inputs, outputs, timing, reset behavior and interlocking requirements.
- ການກວດຈັບ
- Target, sensing distance, environment and required sensor output.
- Panel & order
- DIN-rail space, temperature, quantity, destination market and required documents.
ທ່ານກໍາລັງສ້າງຕູ້ຄວບຄຸມອຸດສາຫະກໍາຢູ່ແມ່ນບໍ?
Share the load, control voltage, operating sequence, sensing requirements and order scope with VIOX.