케이블 러그 제조업체
Compare VIOX cable lug series for dependable conductor termination across panel building, power distribution and industrial equipment.
Conductor matchingMaterial and cross-section
Stud and palmHole size and geometry
Finish and environmentBare or plated series
Installation toolingDie and crimp process
What is a cable lug?
A cable lug terminates a conductor so it can be bolted or otherwise connected to a busbar, terminal, switchgear component or equipment connection point.
Selection requires conductor material, construction and cross-section, lug barrel, palm and stud dimensions, finish, installation tooling, crimp process, environment and the applicable connection standard.
Cable Lug Series Overview
제품 데이터에 이미 제공된 사실을 사용하여 게시된 VIOX 모델을 비교하십시오.
AU 알루미늄 케이블 러그
Cable termination lug모델 데이터 검토
VIOX C45
Cable termination lug모델 데이터 검토
DL 알루미늄 케이블 러그
Cable termination lug모델 데이터 검토
DT 구리 러그
Cable termination lug모델 데이터 검토
DT(G) 구리 러그
Cable termination lug모델 데이터 검토
DTL 구리-알루미늄 러그
Cable termination lug모델 데이터 검토
DTL-1 바이메탈 케이블 러그
Cable termination lug모델 데이터 검토
DTL-2 바이메탈 케이블 러그
Cable termination lug모델 데이터 검토How to choose a cable lug
Match the conductor first, then verify stud geometry, material, finish and crimping method.
Conductor material and size
Use a lug intended for the actual copper or aluminum conductor and cross-section.
Stud hole and palm geometry
Confirm bolt size, palm width, orientation and available connection space.
Material and plating
Match corrosion, interface-metal and environmental requirements.
Tool and die
Use the approved crimping system, die reference, strip length and inspection process.
Treat the crimp as a complete connection system
Conductor, lug, die, tool, crimp sequence and bolted interface all affect connection quality.
Compare published Cable Lug series
빈 셀은 현재 제품 요약에서 해당 값을 사용할 수 없음을 의미합니다. 사양을 확인하기 전에 모델 페이지를 열거나 데이터시트를 요청하십시오.
| 시리즈 | 도체 규격 | 스터드 홀 | 재료 | 완료 |
|---|---|---|---|---|
| AU 알루미늄 케이블 러그 | — | — | — | — |
| VIOX C45 | — | — | — | — |
| DL 알루미늄 케이블 러그 | — | — | — | — |
| DT 구리 러그 | — | — | — | — |
| DT(G) 구리 러그 | — | — | — | — |
| DTL 구리-알루미늄 러그 | — | — | — | — |
| DTL-1 바이메탈 케이블 러그 | — | — | — | — |
| DTL-2 바이메탈 케이블 러그 | — | — | — | — |
Cable Lug Knowledge & Selection Guides
모든 게시물
Cable Lug Selection Questions
상세 회로 검증 전 제품군 비교를 위한 빠른 답변.
How is cable lug size selected?
Match conductor material, construction and cross-section to the published lug barrel and application data.
Can a copper lug be used on aluminum cable?
Only use a lug and preparation method explicitly approved for the conductor and interface metals.
How is the stud hole selected?
Match the equipment bolt while checking palm width, edge distance, orientation and connection space.
Why does the crimping die matter?
The die and tool create the specified compression geometry; an incorrect system can produce an unreliable connection.
What should be inspected after crimping?
Follow the approved process for crimp position, number, visual condition, conductor insertion and any required pull or electrical testing.
Need the Right Cable Lug?
Let’s Match the Conductor and Stud.
Send the conductor material and size, stud diameter, palm orientation, environment, quantity and target market.
Request Cable Lug Support