VIOX Elettrico
Language
English Español Português Français Tiếng Việt Bahasa Indonesia 한국어 Türkçe العربية Deutsch Italiano ไทย 日本語 Polski ဗမာစာ Русский ភាសាខ្មែរ ພາສາລາວ Ελληνικά Čeština Bahasa Melayu اردو Magyar فارسی Tagalog বাংলা

LW26 & LW30 SERIES

Rotary Switches for Circuit Control & Load Isolation

Compare the VIOX LW26 rotary cam switch for configurable control duties with the LW30 load disconnect switch for equipment switching and isolation. Confirm the operating function, current, voltage, mounting and contact requirements before ordering.

Compare LW26 & LW30 Richiesta di preventivo
CIRCUIT CONTROLLW26VIOX LW26 rotary cam switchLOAD ISOLATIONLW30VIOX LW30 load disconnect switch

START WITH THE SWITCHING DUTY

Which function do you need?

The two series can look similar at a glance, but they solve different control and isolation tasks.

Recommended family

LW26 Rotary Cam Switch

Use LW26 when the required result depends on a defined switching angle, contact program or maintained and spring-return operating behavior.

View LW26 product data

MODEL COMPARISON

Compare LW26 and LW30

Use the model pages for complete ratings and ordering combinations. Confirm the exact configuration against the intended circuit.

Fattore di selezioneLW26 Interruttore a camma rotanteLW30 Load Disconnect Switch
Funzione principaleCircuit selection, changeover and control sequencesEquipment load switching and isolation
Rated current range10–315A20–100A
Published voltage rangeUp to 440V AC or 240V DCUp to 440V AC, 50Hz
Operating pattern30°, 45°, 60° or 90°; maintained, spring-return or combinedManual ON/OFF load-disconnection duty
Key ordering inputContact program, switching angle, handle and mountingCurrent, utilization category, poles, handle and enclosure
Opzioni di montaggioMultiple panel and installation arrangements by configurationPanel, padlock-panel, single-hole or optional enclosed configuration
Uso tipicoControl panels, instrument selection, motor-control commandsMachinery, HVAC, pumps and equipment main switching
Product detailsView LW26 View LW30

Inside rotary cam switch production

Real workshop views show the product moving from staged mechanisms through bench assembly to completed switch batches.

Rotary cam switch bodies and shafts staged for assembly in the VIOX workshop
Component stagingCam mechanisms and shafts arranged before handle installation.
VIOX workshop operator assembling rotary cam switches at the production bench
Bench assemblyProduction operator completing assembly and fastening at the workbench.
Completed rotary cam switches arranged for production-stage inspection at VIOX
Completed batchesFinished rotary cam switches organized for the next production-stage check.

APPLICATION ROUTING

Match the series to the equipment task

Application is the starting point. The exact current, voltage, contact duty and switching category still require circuit-level verification.

LW26

Control Panels & Instrument Selection

Choose meters, circuits or operating states through a defined contact program.

LW26

Machinery & Motor-Control Circuits

Use a configured switching program for control duties after the exact load and sequence are verified.

LW30

HVAC & Ventilation Equipment

Provide local switching and isolation for equipment service and maintenance workflows.

LW30

Pumps & Equipment Main Switching

Use as an equipment-level manual disconnect when the declared duty matches the installation.

ORDERING CHECK

Build a quote-ready switch specification

Send the information that changes the internal switching arrangement—not only the current rating.

01
CIRCUIT CONTROL

Configure LW26

  • Required current and operating voltage
  • AC or DC control circuit
  • Contact program or switching diagram
  • Switching angle and number of positions
  • Maintained or spring-return behavior
  • Handle, plate and mounting arrangement
Review LW26 specificationsAsk VIOX to confirm
02
LOAD ISOLATION

Configure LW30

  • Required current, poles and operating voltage
  • Load type and applicable utilization category
  • Panel, padlock-panel or single-hole mounting
  • Open or enclosed installation
  • Required ingress protection for the complete assembly
  • Handle, labeling and OEM requirements
Review LW30 specificationsAsk VIOX to confirm

ROTARY SWITCH KNOWLEDGE CENTER

Select, wire and verify the switching duty

Use six common technical questions before specifying a rotary cam switch or load disconnect switch.

TECHNICAL QUESTIONS

Rotary switch selection FAQ

Use these answers to shortlist a family, then verify the exact model against the circuit and installation.

What is the main difference between LW26 and LW30?

LW26 is a configurable rotary cam switch for selection, changeover and control sequences. LW30 is a load disconnect switch for equipment switching and isolation.

Can LW26 be selected by current rating alone?

No. The contact program, number of positions, switching angle, return behavior, voltage and load duty are also part of the selection.

Can LW30 be used as an equipment main switch?

It is intended for load switching and isolation duties, but the exact current, poles, voltage, utilization category, enclosure and applicable installation requirements must be confirmed.

What information should I send for a quotation?

Send the preferred series, current, voltage, poles or contact program, load type, switching positions, mounting, enclosure, quantity, destination market and OEM requirements.

CONFIGURATION SUPPORT

Have a switching diagram or equipment specification?

Share the circuit duty, ratings, mounting and quantity. VIOX will help identify the appropriate LW26 or LW30 configuration for quotation.

Request Switch Support