Residual Current Circuit Breakers (RCCB)
Compare VIOX RCCB series by rated current, pole configuration, rated residual operating current and waveform type for low-voltage earth-leakage protection.
មុខងារការពារResidual-current detection
ជម្រើសចំនួនប៉ូល2P and 4P by series
ភាពរសើបConfirm IΔn by model
ប្រភេទ RCCBMatch load waveforms
What is a residual current circuit breaker?
An RCCB monitors the balance between current flowing through the outgoing and returning conductors. When the residual current exceeds the device operating characteristics, it disconnects the circuit to support earth-leakage protection.
An RCCB is not selected by rated current alone. Pole configuration, rated residual operating current, RCCB type, circuit voltage and coordination with overload and short-circuit protection must also match the installation.
RCCB Series Overview
ប្រៀបធៀបម៉ូដែល VIOX ដែលបានចេញផ្សាយដោយប្រើទិន្នន័យដែលមានស្រាប់នៅក្នុងព័ត៌មានផលិតផល។.
VIOX VKL11F
ឧបករណ៍កាត់ចរន្តអគ្គិសនីពេលមានការលេចធ្លាយ (Residual current circuit breaker)- បង្គោល
- 2 ភី
VIOX VKL11F
ឧបករណ៍កាត់ចរន្តអគ្គិសនីពេលមានការលេចធ្លាយ (Residual current circuit breaker)- បង្គោល
- ៤P
VIOX VRC1-125-B
ឧបករណ៍កាត់ចរន្តអគ្គិសនីពេលមានការលេចធ្លាយ (Residual current circuit breaker)- បង្គោល
- 2 ភី
- វាយតម្លៃបច្ចុប្បន្ន
- 100A
VIOX VRC3-63
ឧបករណ៍កាត់ចរន្តអគ្គិសនីពេលមានការលេចធ្លាយ (Residual current circuit breaker)- បង្គោល
- 2 ភី
- វាយតម្លៃបច្ចុប្បន្ន
- ២៥ ក
VIOX VKL11
ឧបករណ៍កាត់ចរន្តអគ្គិសនីពេលមានការលេចធ្លាយ (Residual current circuit breaker)- បង្គោល
- 2 ភី
VIOX VKL11
ឧបករណ៍កាត់ចរន្តអគ្គិសនីពេលមានការលេចធ្លាយ (Residual current circuit breaker)- បង្គោល
- ៤P
VIOX VKL11
ឧបករណ៍កាត់ចរន្តអគ្គិសនីពេលមានការលេចធ្លាយ (Residual current circuit breaker)- បង្គោល
- 2 ភី
- ប្រភេទ RCCB
- ប្រភេទ A
VIOX VKL11
ឧបករណ៍កាត់ចរន្តអគ្គិសនីពេលមានការលេចធ្លាយ (Residual current circuit breaker)- បង្គោល
- ៤P
- ប្រភេទ RCCB
- ប្រភេទ A
How to choose an RCCB
Use these checkpoints for preliminary comparison, then verify the exact model documentation and installation requirements.
Rated residual current
Match IΔn to the protection objective and applicable installation requirements.
RCCB waveform type
Choose Type AC, A, F, B or another available type according to the connected loads and standards.
ការកំណត់រចនាសម្ព័ន្ធប៉ូល
Confirm the required 2P or 4P arrangement, circuit voltage and neutral configuration.
Overcurrent coordination
Coordinate the RCCB with the required MCB, fuse or other overcurrent protective device.
RCCB waveform types
Type availability varies by VIOX series. Confirm the product datasheet and applicable installation standard before selection.
Compare published RCCB series
ប្រឡោះទទេមានន័យថា តម្លៃមិនមាននៅក្នុងសេចក្តីសង្ខេបផលិតផលបច្ចុប្បន្នទេ។ សូមបើកទំព័រម៉ូដែល ឬស្នើសុំសន្លឹកទិន្នន័យបច្ចេកទេសរបស់វា មុនពេលធ្វើការកំណត់លក្ខណៈបច្ចេកទេស។.
| ស៊េរី | បង្គោល | វាយតម្លៃបច្ចុប្បន្ន | ប្រភេទ RCCB | ភាពរសើប |
|---|---|---|---|---|
| VIOX VKL11F | 2 ភី | — | — | — |
| VIOX VKL11F | ៤P | — | — | — |
| VIOX VRC1-125-B | 2 ភី | 100A | — | — |
| VIOX VRC3-63 | 2 ភី | ២៥ ក | — | — |
| VIOX VKL11 | 2 ភី | — | — | — |
| VIOX VKL11 | ៤P | — | — | — |
| VIOX VKL11 | 2 ភី | — | ប្រភេទ A | — |
| VIOX VKL11 | ៤P | — | ប្រភេទ A | — |
RCCB applications
Typical environments where the correct residual-current protection characteristics must be verified.
អគារលំនៅដ្ឋាន
Residual-current protection for final circuits and residential distribution boards.
ស្វ័យប្រវត្តិកម្មឧស្សាហកម្ម
Appropriately selected RCCB types for electronic loads, drives and control-system supply circuits.
ថាមពលពន្លឺព្រះអាទិត្យ និងការស្តុកទុកថាមពល
Residual-current protection coordinated with inverter and power-conversion equipment.
RCCB Knowledge & Selection Guides
អត្ថបទទាំងអស់
ការជ្រើសរើស & ការកំណត់ទំហំ30mA ទល់នឹង 100mA ទល់នឹង 300mA RCCB៖ របៀបជ្រើសរើស
RCCB selection questions
Quick answers for comparing a residual-current protection family before detailed circuit verification.
តើ RCCB ការពារប្រឆាំងនឹងអ្វី?
An RCCB detects an imbalance between outgoing and returning current and disconnects the circuit when the residual current exceeds its operating characteristics. It is used for earth-leakage protection in an appropriately designed installation.
Does an RCCB provide overload and short-circuit protection?
An RCCB is selected for residual-current protection and does not normally replace overcurrent protection. The circuit may also require an MCB, fuse or a combined RCBO according to the installation design.
What is the difference between Type AC, A, F and B RCCBs?
The type identifies the residual-current waveforms the device is designed to detect. The correct type depends on the connected equipment, applicable standards and manufacturer documentation; availability varies by VIOX series.
How should RCCB sensitivity be selected?
The rated residual operating current must match the protection objective and the applicable installation rules. Confirm the required sensitivity on the individual model page or datasheet before specification.
Can an RCCB be selected by rated current alone?
No. Rated current, pole configuration, rated residual operating current, RCCB type, circuit voltage and coordination with overcurrent protection must all be checked.
Need the Right RCCB?
តោះមកផ្ទៀងផ្ទាត់ជាមួយគ្នា។.
Send the circuit voltage, rated current, pole configuration, required sensitivity, connected loads, quantity and target market. VIOX will help identify the most relevant published series.
Request RCCB Support