ឧបករណ៍ប្តូរដោយស្វ័យប្រវត្តិ (ATS)
Compare published VIOX automatic transfer switch series for source transfer in low-voltage distribution systems. Confirm poles, rated current, control mode and switching requirements by model.
Two-source transferNormal and alternate supply
ការកំណត់រចនាសម្ព័ន្ធប៉ូលConfirm by series
ឡូជីខលគ្រប់គ្រងAutomatic or manual functions
Project matchingVerify source and load data
What is an automatic transfer switch?
An automatic transfer switch monitors the selected supply conditions and transfers a load between a normal source and an alternate source according to its control logic. It is used where continuity of supply requires an arranged changeover path.
An ATS must be selected as part of the complete distribution system. Rated current, pole arrangement, utilization requirements, transfer sequence, control supply, source conditions and coordination with protective devices all need verification.
ATS Series Overview
ប្រៀបធៀបម៉ូដែល VIOX ដែលបានចេញផ្សាយដោយប្រើទិន្នន័យដែលមានស្រាប់នៅក្នុងព័ត៌មានផលិតផល។.
VIOX VOQ2-63
ឧបករណ៍ប្ដូរដោយស្វ័យប្រវត្តិពិនិត្យទិន្នន័យម៉ូដែល
VIOX VOQ3
ឧបករណ៍ប្ដូរដោយស្វ័យប្រវត្តិពិនិត្យទិន្នន័យម៉ូដែល
VIOX VOQ3-43
ឧបករណ៍ប្ដូរដោយស្វ័យប្រវត្តិពិនិត្យទិន្នន័យម៉ូដែល
VIOX VOQ3-46
ឧបករណ៍ប្ដូរដោយស្វ័យប្រវត្តិពិនិត្យទិន្នន័យម៉ូដែល
VIOX VOQ4-100E
ឧបករណ៍ប្ដូរដោយស្វ័យប្រវត្តិពិនិត្យទិន្នន័យម៉ូដែល
VIOX VOQ4-100R
ឧបករណ៍ប្ដូរដោយស្វ័យប្រវត្តិពិនិត្យទិន្នន័យម៉ូដែល
VIOX VOQ4-63AE
ឧបករណ៍ប្ដូរដោយស្វ័យប្រវត្តិពិនិត្យទិន្នន័យម៉ូដែល
VIOX VOQ4-80AE
ឧបករណ៍ប្ដូរដោយស្វ័យប្រវត្តិពិនិត្យទិន្នន័យម៉ូដែលHow to choose an ATS
Define both sources, the load and the required transfer sequence before comparing switch series.
Rated current and utilization
Match the connected load, switching duty and upstream protective-device coordination.
Pole and neutral arrangement
Confirm the number of switched poles and the project neutral strategy.
Transfer and control logic
Check operating mode, source monitoring, delays and controller functions by model.
Mechanical integration
Verify mounting, wiring access, operating mechanism and enclosure space.
Define the transfer sequence
Transfer behavior varies by controller and switch series. Confirm the exact sequence before specifying the product.
Compare published ATS series
ប្រឡោះទទេមានន័យថា តម្លៃមិនមាននៅក្នុងសេចក្តីសង្ខេបផលិតផលបច្ចុប្បន្នទេ។ សូមបើកទំព័រម៉ូដែល ឬស្នើសុំសន្លឹកទិន្នន័យបច្ចេកទេសរបស់វា មុនពេលធ្វើការកំណត់លក្ខណៈបច្ចេកទេស។.
| ស៊េរី | ការកំណត់រចនាសម្ព័ន្ធ | វាយតម្លៃបច្ចុប្បន្ន | វ៉ុលដែលបានវាយតម្លៃ | Control mode |
|---|---|---|---|---|
| VIOX VOQ2-63 | — | — | — | — |
| VIOX VOQ3 | — | — | — | — |
| VIOX VOQ3-43 | — | — | — | — |
| VIOX VOQ3-46 | — | — | — | — |
| VIOX VOQ4-100E | — | — | — | — |
| VIOX VOQ4-100R | — | — | — | — |
| VIOX VOQ4-63AE | — | — | — | — |
| VIOX VOQ4-80AE | — | — | — | — |
ATS Applications
បរិស្ថានធម្មតាដែលតម្រូវឱ្យមានការផ្ទៀងផ្ទាត់លក្ខណៈពិសេសរបស់ផលិតផលឱ្យបានច្បាស់លាស់។.
អគារលំនៅដ្ឋាន
Source transfer for selected residential and mixed-use distribution systems.
ស្វ័យប្រវត្តិកម្មឧស្សាហកម្ម
Continuity support for process auxiliaries and industrial distribution loads.
ថាមពលពន្លឺព្រះអាទិត្យ និងការស្តុកទុកថាមពល
Coordinated source selection within approved hybrid and backup-power architectures.
ATS Knowledge & Selection Guides
អត្ថបទទាំងអស់
ATS Selection Questions
ចម្លើយរហ័សសម្រាប់ការប្រៀបធៀបក្រុមផលិតផលបឋម មុនពេលធ្វើការផ្ទៀងផ្ទាត់សៀគ្វីលម្អិត។.
What does an automatic transfer switch do?
An ATS transfers a load between two arranged supply sources according to the monitoring and control functions of the selected model.
Which information is needed to select an ATS?
Confirm both source voltages and frequencies, load current, poles, neutral arrangement, switching duty, transfer sequence, control requirements and installation method.
Is an ATS an overcurrent protective device?
An ATS performs switching and transfer. Overload and short-circuit protection must be coordinated with the protective devices specified for the system.
Can every ATS switch a generator supply?
Generator applications require compatible source monitoring, timing, control interfaces and switching ratings. Confirm these functions on the exact series.
What is the difference between automatic and manual transfer?
Automatic transfer uses monitoring and controller logic to initiate the sequence. Manual operation requires an operator action; available modes vary by model.
Need the Right ATS?
Let’s Define the Transfer Sequence.
Send both source details, load current, pole arrangement, control requirements, quantity and target market. VIOX will help identify the relevant published series.
Request ATS Support