Low-Voltage Fuses & Fuse Holders
Compare VIOX fuse links, fuse holders and fuse disconnectors for low-voltage AC and DC circuit protection and isolation assemblies.
Proteksi arus berlebihFuse-link based protection
Product formLink, holder or disconnector
AC or DC systemKonfirmasi berdasarkan model
Kapasitas pemutusanSesuaikan dengan tingkat gangguan
What is a low-voltage fuse?
A fuse uses a calibrated element that melts when current exceeds its time-current characteristics, interrupting the circuit. After operation, the fuse link must be replaced with the correct compatible rating and type.
The complete assembly may include a fuse link, holder, base or switch disconnector. Rated current, voltage, utilization category, breaking capacity, size and AC or DC suitability must be coordinated.
Fuse Series Overview
Bandingkan model VIOX yang dipublikasikan menggunakan fakta yang sudah tersedia dalam data produk.
Pemutus Sekering Batang
Low-voltage fuse product- Nilai saat ini
- 160A–800A
- Tegangan
- Up to 690V
- Short-circuit
- Up to 120kA
- Standar
- IEC/EN 60947-3
Tautan Fuse Silindris
Low-voltage fuse product- Product form
- Tautan Sekering
VIOX HR17
Low-voltage fuse product- Product form
- Fuse Disconnector
VIOX NT0
Low-voltage fuse product- Product form
- Tautan Sekering
VIOX NT00
Low-voltage fuse product- Product form
- Tautan Sekering
VIOX NT00C
Low-voltage fuse product- Product form
- Tautan Sekering
VIOX RT18-125
Low-voltage fuse product- Product form
- Pemegang Sekring
VIOX RT18-63
Low-voltage fuse product- Product form
- Pemegang Sekring
How to choose a fuse system
Select the fuse link and its holder or disconnector as one coordinated assembly.
Arus dan tegangan terukur
Match the circuit conditions and avoid using an AC-only rating for an unapproved DC application.
Kapasitas putus
Confirm the fuse can interrupt the prospective fault current at the specified voltage.
Fuse size and product form
Match the fuse-link dimensions, holder, mounting method and conductor arrangement.
Kategori pemanfaatan
Choose the operating class and time-current behaviour required by the protected circuit.
One coordinated fuse assembly
A fuse link, holder and switch disconnector perform different roles. Verify compatibility before ordering.
Compare published Fuse series
Sel kosong berarti nilai tidak tersedia dalam ringkasan produk saat ini. Buka halaman model atau minta lembar data produk sebelum melakukan spesifikasi.
| Seri | Product form | Nilai saat ini | Tegangan pengenal | Sistem |
|---|---|---|---|---|
| Pemutus Sekering Batang | — | 160A–800A | Up to 690V | — |
| Tautan Fuse Silindris | Tautan Sekering | — | — | — |
| VIOX HR17 | Fuse Disconnector | — | — | — |
| VIOX NT0 | Tautan Sekering | — | — | — |
| VIOX NT00 | Tautan Sekering | — | — | — |
| VIOX NT00C | Tautan Sekering | — | — | — |
| VIOX RT18-125 | Pemegang Sekring | — | — | — |
| VIOX RT18-63 | Pemegang Sekring | — | — | — |
Fuse Applications
Lingkungan tipikal di mana karakteristik produk yang tepat harus diverifikasi.
Bangunan Tempat Tinggal
Fuse protection and isolation for selected incoming and distribution applications.
Otomasi Industri
Fuse links and holders for machine, motor and control-power protection assemblies.
Tenaga Surya & Penyimpanan Energi
DC fuse systems selected for string voltage, current and fault-interruption requirements.
Fuse Knowledge & Selection Guides
Semua artikel
Fuse Selection Questions
Jawaban cepat untuk perbandingan awal keluarga produk sebelum verifikasi sirkuit secara mendetail.
What is the difference between a fuse link and a fuse holder?
The fuse link contains the calibrated element that interrupts overcurrent. The holder supports connection, installation and replacement of a compatible fuse link.
Can a fuse be reused after it operates?
No. An operated fuse link must be replaced with the correct compatible type and rating after the cause of the fault is resolved.
Can an AC fuse be used in a DC circuit?
Not unless the product is explicitly rated for the DC voltage and application. DC interruption can require different construction and ratings.
Which details are needed to select a fuse?
Confirm rated current, voltage, AC or DC system, utilization category, breaking capacity, physical size and the compatible holder or disconnector.
What does a fuse switch disconnector add?
It combines fuse-link based protection with a mechanism intended for controlled isolation. Exact switching and protection ratings must be checked on the product documentation.
Need the Right Fuse System?
Let’s Match the Assembly.
Send the circuit voltage, current, AC or DC system, required fuse form, quantity and target market. VIOX will help narrow the compatible product range.
Request Fuse Support