Industrial Foot Switch Manufacturer
Compare VIOX industrial foot switch series for hands-free machine commands, process control and equipment operation.
Contact functionMatch the control circuit
Operating actionMomentary or maintained by model
Housing and guardMatch workplace exposure
Cable connectionEntry and wiring details
What is a foot switch?
A foot switch is a foot-operated control device that changes electrical contacts to command a machine or process while the operator keeps both hands available.
Selection requires the control-circuit function, contact arrangement, operating action, switching duty, mechanical life, housing, protective guard, cable entry, environment and machine-safety architecture.
Foot Switch Series Overview
제품 데이터에 이미 제공된 사실을 사용하여 게시된 VIOX 모델을 비교하십시오.
VIOX 5A-B
Foot-operated control switch모델 데이터 검토
VIOX LT3
Foot-operated control switch모델 데이터 검토
VIOX LT4
Foot-operated control switch모델 데이터 검토
VIOX LT5
Foot-operated control switch모델 데이터 검토
LTH-1/6 풋 스위치
Foot-operated control switch모델 데이터 검토
TFS-1 풋 스위치
Foot-operated control switch모델 데이터 검토
TFS-101 풋 스위치
Foot-operated control switch모델 데이터 검토TFS-105 풋 스위치
Foot-operated control switch모델 데이터 검토How to choose a foot switch
Define the control and safety function first, then verify contacts, action and workplace construction.
Control-circuit duty
Verify contact arrangement and published switching characteristics.
Momentary or maintained action
Match the operating sequence and reset behavior required by the machine.
Guard and housing
Assess accidental operation, impact, dust, water and floor conditions.
Cable and installation
Confirm cable length, entry, strain relief, wiring and mounting or anti-slip method.
Separate control from machine safety
A foot switch command does not replace the required safety system unless the exact approved architecture provides that function.
Compare published Foot Switch series
빈 셀은 현재 제품 요약에서 해당 값을 사용할 수 없음을 의미합니다. 사양을 확인하기 전에 모델 페이지를 열거나 데이터시트를 요청하십시오.
| 시리즈 | 연락처 | 액션 | 주택 | 보호 |
|---|---|---|---|---|
| VIOX 5A-B | — | — | — | — |
| VIOX LT3 | — | — | — | — |
| VIOX LT4 | — | — | — | — |
| VIOX LT5 | — | — | — | — |
| LTH-1/6 풋 스위치 | — | — | — | — |
| TFS-1 풋 스위치 | — | — | — | — |
| TFS-101 풋 스위치 | — | — | — | — |
| TFS-105 풋 스위치 | — | — | — | — |
Foot Switch Applications
정확한 제품 사양 확인이 필요한 일반적인 환경.
Foot Switch Knowledge & Selection Guides
모든 게시물
Foot Switch Selection Questions
상세 회로 검증 전 제품군 비교를 위한 빠른 답변.
What is a foot switch used for?
It provides a foot-operated command for suitable machinery, tools and process equipment.
What is the difference between momentary and maintained action?
Momentary action returns when released; maintained action holds state until another operation or reset, depending on the model.
Does a foot switch provide an emergency-stop function?
Only if the exact device and machine safety architecture are approved for that function. A general control foot switch must not be assumed to be a safety device.
How should contact configuration be selected?
Choose normally open, normally closed or changeover contacts from the control logic and published device data.
Which environmental details matter?
Consider floor conditions, dust, water, impact, chemicals, temperature, cable routing and accidental-operation risk.
Need the Right Foot Switch?
Let’s Match the Control Sequence.
Send the machine function, contact logic, operating action, environment, cable requirements, quantity and target market.
Request Foot Switch Support