VIOX 24V AC Button Photocell Sensor
Overview
The VIOX 24V AC Button Photocell Sensor is a highly reliable and efficient lighting control device designed for 24-volt lighting applications. This sensor is ideal for use with Solar, Induction, LED, and CFL lighting systems. It features a fixed position mount and is designed to fit into compatible light fixtures or standard outlet boxes. The VIOX dusk-to-dawn photocell ensures energy efficiency by automatically turning lights on at dusk and off at dawn based on ambient light levels.
Key Features
- Automatic Lighting Control: Automatically turns on or off the load circuit based on changes in light intensity.
- Wide Compatibility: Works well with Solar, Induction, LED, and CFL lighting systems.
- Fixed Position Mount: Designed to fit into compatible light fixtures or standard outlet boxes.
- Energy Efficient: Helps save energy by ensuring lights are only on when needed.
- Durable Construction: Designed for long-lasting performance with a 1-year warranty.
- Weatherproof: Must be installed in an approved weatherproof box for optimal performance.
- High Rating: Supports up to 7 Amps.
Specifications
| Item | Details |
|---|---|
| Manufacturer | VIOX |
| MPN | LCA-624A |
| SKU | LCA-624A |
| Voltage | 24VAC |
| Rating | 7 Amps |
| Turn On | 1-3 Footcandles |
| Time Delay | 1-5 Seconds |
| Dimensions | 1 1/8″W x 2″H x 1 3/4″D |
| Mount Type | Fixed Position |
| Warranty | 1 Year Limited |
| Switch Type | SPST |
Applications
The VIOX 24V AC Button Photocell Sensor is ideal for a variety of applications, including street lighting, gardens, parks, and other outdoor lighting systems. Its robust design and reliable performance make it suitable for both commercial and industrial environments.
Technical Data
- Voltage: 24VAC
- Rating: 7 Amps
- Turn On: 1-3 Footcandles
- Time Delay: 1-5 Seconds
- Dimensions: 1 1/8″W x 2″H x 1 3/4″D
- Mount Type: Fixed Position
- Warranty: 1 Year Limited
- Switch Type: SPST
- Type of Protection: IP 53
- Ambient Temperature: -10℃ ~ +50℃
- Ambient Humidity: 35 ~ 85% RH
Tips To Optimize Photocell Performance
- Do not face the photocell into the midday sun. If installed on the south side of a building, face the photocell east or west or point it down toward the ground. The best direction is north.
- Do not face the photocell where it can see artificial light, such as from windows, signs, or street lights, as this will cause the photo control not to switch on.
- Ensure the photocell is installed in an approved weatherproof box and not with wires up unless there is no possibility of water entering around the wires.
- When testing the photocell, turn on the power and wait up to 5 minutes for the photocell to switch the load off. For further testing, cover the photo control completely with black tape or another dark material to simulate night conditions.
