Industrial Foot Switch Manufacturer
Compare VIOX industrial foot switch series for hands-free machine commands, process control and equipment operation.
Contact functionMatch the control circuit
Operating actionMomentary or maintained by model
Housing and guardMatch workplace exposure
Cable connectionEntry and wiring details
What is a foot switch?
A foot switch is a foot-operated control device that changes electrical contacts to command a machine or process while the operator keeps both hands available.
Selection requires the control-circuit function, contact arrangement, operating action, switching duty, mechanical life, housing, protective guard, cable entry, environment and machine-safety architecture.
Foot Switch Series Overview
ປຽບທຽບຮຸ່ນ VIOX ທີ່ເຜີຍແຜ່ໂດຍໃຊ້ຂໍ້ມູນທີ່ມີຢູ່ແລ້ວໃນຂໍ້ມູນຜະລິດຕະພັນ.
VIOX 5A-B
Foot-operated control switchກວດສອບຂໍ້ມູນຮຸ່ນ
VIOX LT3
Foot-operated control switchກວດສອບຂໍ້ມູນຮຸ່ນ
VIOX LT4
Foot-operated control switchກວດສອບຂໍ້ມູນຮຸ່ນ
VIOX LT5
Foot-operated control switchກວດສອບຂໍ້ມູນຮຸ່ນ
LTH-1/6 ສະຫຼັບຕີນ
Foot-operated control switchກວດສອບຂໍ້ມູນຮຸ່ນ
TFS-1 ສະຫຼັບຕີນ
Foot-operated control switchກວດສອບຂໍ້ມູນຮຸ່ນ
TFS-101 ສະຫຼັບຕີນ
Foot-operated control switchກວດສອບຂໍ້ມູນຮຸ່ນສະຫຼັບຕີນ TFS-105
Foot-operated control switchກວດສອບຂໍ້ມູນຮຸ່ນHow to choose a foot switch
Define the control and safety function first, then verify contacts, action and workplace construction.
Control-circuit duty
Verify contact arrangement and published switching characteristics.
Momentary or maintained action
Match the operating sequence and reset behavior required by the machine.
Guard and housing
Assess accidental operation, impact, dust, water and floor conditions.
Cable and installation
Confirm cable length, entry, strain relief, wiring and mounting or anti-slip method.
Separate control from machine safety
A foot switch command does not replace the required safety system unless the exact approved architecture provides that function.
Compare published Foot Switch series
ຊ່ອງຫວ່າງໝາຍເຖິງຄ່ານັ້ນບໍ່ມີຢູ່ໃນບົດສະຫຼຸບຜະລິດຕະພັນປັດຈຸບັນ. ກະລຸນາເປີດໜ້າຮຸ່ນຜະລິດຕະພັນ ຫຼື ຮ້ອງຂໍເອກະສານຂໍ້ມູນທາງເຕັກນິກ (datasheet) ກ່ອນການກຳນົດສະເປັກ.
| ຕໍ່ລຽນ | ການຕິດຕໍ່ | ການປະຕິບັດ | ທີ່ຢູ່ອາໄສ | ການປົກປ້ອງ |
|---|---|---|---|---|
| VIOX 5A-B | — | — | — | — |
| VIOX LT3 | — | — | — | — |
| VIOX LT4 | — | — | — | — |
| VIOX LT5 | — | — | — | — |
| LTH-1/6 ສະຫຼັບຕີນ | — | — | — | — |
| TFS-1 ສະຫຼັບຕີນ | — | — | — | — |
| TFS-101 ສະຫຼັບຕີນ | — | — | — | — |
| ສະຫຼັບຕີນ TFS-105 | — | — | — | — |
Foot Switch Applications
ສະພາບແວດລ້ອມທົ່ວໄປທີ່ຕ້ອງມີການກວດສອບຄຸນລັກສະນະຂອງຜະລິດຕະພັນຢ່າງລະອຽດ.
Foot Switch Knowledge & Selection Guides
ບົດຄວາມທັງໝົດ
Foot Switch Selection Questions
ຄຳຕອບດ່ວນສຳລັບການປຽບທຽບກຸ່ມຜະລິດຕະພັນເບື້ອງຕົ້ນ ກ່ອນການກວດສອບວົງຈອນຢ່າງລະອຽດ.
What is a foot switch used for?
It provides a foot-operated command for suitable machinery, tools and process equipment.
What is the difference between momentary and maintained action?
Momentary action returns when released; maintained action holds state until another operation or reset, depending on the model.
Does a foot switch provide an emergency-stop function?
Only if the exact device and machine safety architecture are approved for that function. A general control foot switch must not be assumed to be a safety device.
How should contact configuration be selected?
Choose normally open, normally closed or changeover contacts from the control logic and published device data.
Which environmental details matter?
Consider floor conditions, dust, water, impact, chemicals, temperature, cable routing and accidental-operation risk.
Need the Right Foot Switch?
Let’s Match the Control Sequence.
Send the machine function, contact logic, operating action, environment, cable requirements, quantity and target market.
Request Foot Switch Support