Electrical Components for Data Centers & Telecom Power Systems

Coordinate source transfer, electrical monitoring, surge protection and auxiliary distribution around continuity-focused low-voltage infrastructure.

Explore the power path View product families

Modern data center electrical and telecommunications infrastructure — کاربرد برق در زیرساخت‌های دیجیتال

Map the power path before selecting components.

Normal and alternate sources, transfer equipment, distribution, UPS architecture and downstream loads form one coordinated system. Use the controls to inspect the conceptual source path, then verify every device against the actual electrical design.

انتقالAutomatic transfer between defined sources
DistributeMain low-voltage distribution
وضعیتUPS and bypass architecture
RouteRack PDU or telecom distribution
ServeCritical IT and telecom loads

Monitor source conditionsVoltage and phase monitoring Coordinate surge protectionPosition, mode, earthing and leads Separate branch faultsOvercurrent protection and isolation

Conceptual architecture—not a wiring, selectivity or reliability design. UPS, rack PDU and critical-load nodes show the wider system context and are not presented as VIOX products. Source transfer, neutral treatment, protection settings and coordination must be defined for the actual installation.

Choose components by their duty in the system.

Build a preliminary product shortlist around transfer, monitoring, transient protection, branch protection and panel distribution. Confirm exact ratings and documentation on the selected model.

Automatic Transfer Switches representative VIOX product

انتقال منبع

سوئیچ های انتقال خودکار

Define controlled transfer between normal and alternate low-voltage sources.

Explore products

Condition monitoring

Voltage & Phase Monitoring Relays

Provide control signals when monitored supply conditions move outside selected limits.

Explore products

Transient protection

AC Surge Protective Devices

Limit transient overvoltage at coordinated positions in the low-voltage power path.

Explore products

حفاظت شاخه‌ای

MCB Circuit Protection

Protect selected auxiliary and branch circuits against overload and short circuit.

Explore products

Power Distribution Blocks representative VIOX product

Conductor distribution

بلوک‌های توزیع برق

Organize incoming conductors into multiple outgoing paths inside electrical panels.

Explore products

DIN-Rail Terminal Blocks representative VIOX product

Panel connection

ترمینال‌ بلاک‌های ریلی DIN

Create identifiable termination points for power, monitoring and control conductors.

Explore products

Define the protection boundary at each zone.

A device is selected by its electrical duty and position—not by the words “data center” alone. Divide the system into zones so faults, maintenance and monitoring requirements remain explicit.

Source & transfer: Confirm source arrangement, transfer sequence, poles, neutral treatment, interlocking and the available short-circuit current.
توزیع اصلی: Define incoming protection, bus and conductor ratings, selectivity objectives, surge protection and maintainable isolation boundaries.
UPS & bypass interface: Follow the UPS manufacturer’s requirements for input, bypass, output, protection, leakage current and switching arrangements.
Rack-support & telecom circuits: Separate critical, control and auxiliary loads; verify branch current, conductor capacity, fault level and the acceptable outage scope.

Prepare the electrical requirement set.

Share confirmed system data and identify unknown items for engineering review. Continuity objectives cannot replace electrical ratings, coordination studies or equipment instructions.

Sources & transfer: Normal and alternate supplies, transfer sequence, poles, neutral switching and control method.
System ratings: Voltage, frequency, phases, load current and prospective short-circuit current.
Fault boundaries: Required selectivity, backup protection, branch separation and acceptable outage scope.
نظارت: Conditions to detect, thresholds, delay, reset logic, output contacts and control voltage.
محافظت در برابر نوسانات برق: Installation position, earthing system, protection modes, conductor route and coordination.
Project & order: Panel environment, quantity, destination market, required standards and model documents.

Power continuity and protection guides

Use these technical references to resolve the system-level decisions that sit behind a product request.

Dual Power ATS GuideUnderstand the role, sequence and selection inputs of an automatic transfer switch. ATS Wiring & Switched NeutralReview 2P, 3P and 4P arrangements and the boundary around neutral switching. ATS vs Static Transfer SwitchCompare mechanical source transfer with high-speed static transfer duties. SPD Coordination & CascadingPlan multiple surge-protection stages around location, distance and declared data. Main vs Branch Circuit BreakersDefine protection zones and the different duties of upstream and downstream devices. بلوک‌های توزیع برقUnderstand conductor distribution, current paths and the information needed for selection.

Defining a data center or telecom power panel?

Share the source arrangement, electrical ratings, monitoring functions, protection boundaries, project market and order scope with VIOX.

Build Your Power-System Request