Tổng quan
The VAF1-40 is an arc fault detection device combining arc-fault detection with Type A residual-current, overload and short-circuit protection. Designed for AC 50 Hz final circuits, it has a rated voltage of 240 V AC and is available in rated currents from 6 A to 40 A. The 1P+N device offers B or C overcurrent tripping characteristics and 10 mA or 30 mA residual-current sensitivities. It is intended for residential and commercial electrical installations requiring combined protection against electrical fires, electric shock and overcurrent faults.
Đặc trưng
- Integrated arc-fault, Type A residual-current, overload and short-circuit protection.
- Compliant with IEC/EN 61009-1 and IEC/EN 62606.
- Rated-current options from 6 A to 40 A.
- B and C overcurrent tripping characteristics.
- 10 mA and 30 mA residual-current sensitivities.
- Load-disconnect contact with 6 kA rated short-circuit current.
Thông số kỹ thuật
Electrical Data
| Tham số | Đặc điểm kỹ thuật |
|---|---|
| Dòng điện định mức (In) | 6, 10, 13, 16, 20, 25, 32, 40 A |
| Điện áp định mức (Ue) | 240 V AC |
| Tần suất hoạt động | 50 Hz |
| Minimum test-circuit operating voltage | 196 V |
| Maximum test-circuit operating voltage | 253 V |
| Điện áp cách điện định mức (Ui) | 250 V |
| Điện áp chịu xung định mức (Uimp) | 4 kV |
| Dòng điện ngắn mạch định mức | 6 kA |
| Maximum total rated switching capacity | 6 kA |
| Surge-current withstand strength | 0.25 kA |
| Power loss per current path | 3 W |
| Short-circuit back-up fuse (SCPD) | 100 A |
| Back-up fuse type | gG |
| Loại quá áp | III |
Protection Data
| Tham số | Đặc điểm kỹ thuật |
|---|---|
| Cấu hình sản phẩm | AFDD tích hợp bảo vệ dòng điện dư loại A, bảo vệ quá tải và ngắn mạch |
| Số cực | 1P+N |
| Loại dòng dư | Loại A |
| Rated residual operating current (IΔn) | 10, 30 mA |
| Overcurrent tripping characteristic | B, C |
| Load-circuit specification | Load-disconnect contact |
Installation Data
| Tham số | Đặc điểm kỹ thuật |
|---|---|
| Loại thiết bị đầu cuối | Screw-type terminals; top or bottom connection on the load circuit |
| Neutral conductor position | Left or right |
| Chiều dài cáp kết nối tối đa | 70 m between the distribution board and the furthest socket outlet |
| Terminal clamping capacity | 1-25 mm² |
| Terminal tightening torque | 2-2.4 N·m |
Standards Data
| Tham số | Đặc điểm kỹ thuật |
|---|---|
| Các tiêu chuẩn áp dụng | IEC/EN 61009-1; IEC/EN 62606 |
Hướng dẫn lựa chọn
| Code position | Ý nghĩa | Catalog reference |
|---|---|---|
| V | VIOX enterprise identification | V |
| AF | Arc-fault protection product family | AF |
| 1 | Design serial number | 1 |
| 40 | Maximum frame current | 40 |
| C16 | C tripping characteristic and rated current | 16 giờ sáng |
| A30 | Thiết bị bảo vệ dòng rò loại A | 30 mA |
Bình Hiện Tại
Select a listed rating from 6 A to 40 A to match the final-circuit rating.
Tripping Characteristic
Select a B or C overcurrent tripping characteristic according to the circuit requirements.
Residual Sensitivity
Select a Type A residual operating-current sensitivity of 10 mA or 30 mA.
Ứng dụng
- Residential final circuits.
- Commercial final circuits.
- Circuits requiring arc-fault and electrical-fire protection.
- Circuits requiring combined residual-current and overcurrent protection.
Cài đặt
- Use screw-type terminals with top or bottom connection on the load circuit.
- Confirm whether the selected configuration places the neutral conductor on the left or right.
- Use conductors within the listed terminal clamping capacity of 1-25 mm².
- Apply the listed terminal tightening torque of 2-2.4 N·m.
- Keep the connected cable length within 70 m between the distribution board and the furthest socket outlet.
- Use the listed 100 A gG short-circuit back-up fuse.
Downloads
Câu hỏi thường gặp
Which protection functions are integrated into the VAF1-40?
It combines arc-fault detection with Type A residual-current, overload and short-circuit protection.
Which rated currents and tripping characteristics are available?
The catalog lists 6, 10, 13, 16, 20, 25, 32 and 40 A ratings with B or C overcurrent tripping characteristics.
Which residual-current sensitivities are offered?
The VAF1-40 provides Type A residual-current protection with 10 mA or 30 mA sensitivity.
What is the VAF1-40 rated short-circuit current?
The rated short-circuit current is 6 kA.
What is the maximum connected cable length?
The catalog specifies a maximum of 70 m between the distribution board and the furthest socket outlet.
Which standards are listed for the VAF1-40?
The applicable standards are IEC/EN 61009-1 and IEC/EN 62606.
