Cable Tie Manufacturer for Nylon & Stainless Steel Ties
Source nylon and stainless steel cable ties by bundle diameter, holding requirement, installation environment, locking style and mounting method. VIOX supports standard series, specialty constructions, bulk orders and OEM requirements.
Bundle fitDiameter, width and length
Material & environmentNylon hoặc thép không gỉ
Locking & mountingPermanent, releasable or fixed
Supply requirementsQuantity, packaging and documents
Five inputs narrow the cable tie family.
Use the information you already have. Exact dimensions, strength and environmental limits still need to be checked on the selected model.
- 01Đường kính bó dây
Measure the finished bundle and allow for the intended routing.
- 02Yêu cầu về khả năng giữ chặt
State the required tensile class or retention requirement where known.
- 03Môi trường
Identify indoor, outdoor, UV, heat, chemical or corrosive exposure.
- 04Vật liệu
Shortlist nylon or stainless steel from the actual service conditions.
- 05Locking & mounting
Choose permanent, releasable, push-mount, screw-mount or metal locking.
For a quotation, also include quantity, packaging, target market and document requirements.
Choose a Cable Tie Series
Start with the required locking or mounting method, then confirm dimensions, material and service conditions on the exact product page.
General Nylon Ties
Straightforward bundling for routine wiring and installations that may require later adjustment.
Mounting & Specialty Nylon Ties
Designs that combine bundling with panel mounting or accommodate a specific routing geometry.
Dây buộc cáp đẩy để bán
Mounting or specialty nylon tieCombines cable bundling with direct installation into a compatible panel hole.
- Thiết kế
- Gắn Đẩy
Screw Hole Mount Cable Ties For Sale
Mounting or specialty nylon tieAdds a fixed screw-mount point for controlled routing on panels or equipment.
- Thiết kế
- Screw Hole Mount
Dây buộc cáp bằng nylon đầu máy bay
Mounting or specialty nylon tieA low-profile head direction for restricted routing and installation geometry.
- Nhóm vật liệu
- Nylon
- Thiết kế
- Aircraft Head
Dây buộc cáp hai đầu
Mounting or specialty nylon tieProvides two locking paths for separated or parallel bundle control.
- Thiết kế
- Double Head
Uncoated Stainless Steel Ties
Metal locking structures for projects that require verified mechanical and environmental performance.
Dây buộc cáp bằng thép không gỉ khóa bi không tráng phủ
Uncoated stainless steel tieA ball-lock metal tie for demanding outdoor and industrial fastening duties.
- Nhóm vật liệu
- Thép không gỉ
- Thiết kế
- Ball Lock
- Hoàn thành
- Uncoated
Khóa đơn thang thép không gỉ
Uncoated stainless steel tieA ladder-style metal tie selected by locking structure and installation method.
- Nhóm vật liệu
- Thép không gỉ
- Thiết kế
- Ladder Single Lock
Dây buộc cáp bằng thép không gỉ khóa Ratchet
Uncoated stainless steel tieA ratchet-lock construction for projects requiring that specific locking behavior.
- Nhóm vật liệu
- Thép không gỉ
- Thiết kế
- Ratchet Lock
Coated & Releasable Stainless Steel Ties
Coated contact surfaces and alternative locking behavior for defined installation needs.
Dây buộc cáp bằng thép không gỉ Ball Lock phủ PVC
Coated or releasable stainless tieA coated metal tie where the specified surface layer suits the cable and environment.
- Nhóm vật liệu
- Thép không gỉ
- Thiết kế
- Ball Lock
- Hoàn thành
- Pvc Coated
Dây buộc cáp bằng thép không gỉ Ball Lock phủ Polyester
Coated or releasable stainless tieA polyester-coated direction for defined contact and environmental requirements.
- Nhóm vật liệu
- Thép không gỉ
- Thiết kế
- Ball Lock
- Hoàn thành
- Polyester Coated
Dây buộc cáp bằng thép không gỉ có thể tháo rời
Coated or releasable stainless tieA stainless construction for projects that also require release or later adjustment.
- Nhóm vật liệu
- Thép không gỉ
- Thiết kế
- Có Thể Tháo Rời
Nylon or stainless steel?
Choose from the installation conditions, not from material name alone.
| Selection condition | Start with nylon | Evaluate stainless steel |
|---|---|---|
| Routine installation | General bundling, varied mounting styles and fast manual installation. | When the required retention or permanence exceeds the verified nylon option. |
| Outdoor & UV exposure | Only when the exact material and UV characteristics are suitable. | For exposed duty after confirming grade, construction and installation method. |
| Heat, chemicals & corrosion | Use the model-specific temperature and chemical-resistance data. | Evaluate grade and coating against the actual temperature and corrosive media. |
| Access & maintenance | Releasable designs support adjustment where the model permits reuse. | Confirm whether a releasable lock or installation tool is required. |
The exact product specification determines suitability. Material family alone is not a performance guarantee.
Route the application to a product direction.
Each environment changes the material, locking, mounting and verification priorities.
Electrical panels & cabinets
Prioritize bundle fit, routing control, mounting method and repeatable installation.
Nylon · push-mount · screw-mountWiring harnesses & machinery
Confirm bundle geometry, adjustment needs, vibration and production tooling.
Self-locking · releasable · specialty nylonSolar, telecom & exposed routing
Check UV, temperature, weather exposure and long-term retention by model.
Verified nylon · coated or uncoated steelMarine & corrosive environments
Match stainless grade, coating, cable contact and locking method to the site.
Stainless steel · coated steelBuild a cable tie RFQ that can be matched to a model.
Send what is known. VIOX can identify the remaining product, document or packaging details before quotation.
Send your cable tie specification- Ứng dụngWhere and how the bundle is installed
- LoạiLocking and mounting preference
- Vật liệuNylon, stainless grade or coating
- Kích thướcWidth, length and bundle diameter
- Biểu diễnHolding or tensile requirement
- Môi trườngTemperature, UV, chemical or corrosion exposure
- OrderQuantity, packaging, label and OEM needs
- Tài liệuTarget market and required evidence
Cable Tie Knowledge & Selection Guides
Tất cả các bài viết
Lựa chọn & Kích thướcHướng dẫn lựa chọn dây rút nhựa: Các loại, kích thước và vật liệu
Cable Tie Selection Questions
Quick answers for comparing cable tie materials, dimensions and ordering requirements before final model confirmation.
How do I choose the correct cable tie size?
Measure the finished bundle diameter first, then choose a product whose published bundle range, width and usable length fit the installation without undersizing the tie.
Should I choose nylon or stainless steel?
Start with the actual temperature, UV, chemical, corrosion and holding requirements. Nylon suits many routine installations; evaluate stainless steel when the verified limits of the selected nylon model are not sufficient.
What information is required for a cable tie quotation?
Provide the application, bundle diameter, material, width and length, holding requirement, environment, quantity, packaging and any model-specific document or OEM requirement.
Send Your Cable Tie Requirements.
Get a Model-Specific Recommendation.
Share the application, bundle diameter, preferred material, size, holding requirement, environment and order quantity. VIOX will use these inputs to identify a suitable product direction and confirm the exact model data.
Request Cable Tie Support