Manyetik Kablo Bağı Bağlantıları Üreticisi
Compare VIOX cable tie mounting solutions for organizing cables on suitable steel surfaces and equipment without permanent drilling.
Surface matchingVerify magnetic substrate
Cable loadBundle and routing forces
Mount geometryTie slot and orientation
ÇevreVibration, heat and corrosion
What is a magnetic cable tie mount?
A magnetic cable tie mount combines a magnetic base with a tie attachment point so cable bundles can be routed on suitable ferromagnetic surfaces without drilling an attachment hole.
The mount must be selected from surface material and condition, magnetic holding data, bundle load and direction, tie compatibility, vibration, temperature, corrosion exposure and required installation permanence.
Cable Tie Mount Series Overview
Ürün verilerinde halihazırda mevcut olan gerçekleri kullanarak yayınlanmış VIOX modellerini karşılaştırın.
How to choose a magnetic cable tie mount
Start with the mounting surface and load direction, then verify holding, tie and environmental requirements.
Surface material and condition
Paint, coatings, curvature, contamination and steel thickness can affect holding.
Bundle load and direction
Account for cable weight, pulling force, vibration and vertical or overhead use.
Tie-slot compatibility
Match tie width, orientation, bundle diameter and routing geometry.
Environment and permanence
Check temperature, corrosion, movement and whether secondary retention is required.
Verify the real installed holding condition
Magnet performance depends on the actual surface, air gap, load direction and environment.
Compare published Cable Tie Mount series
Boş hücreler, değerin mevcut ürün özetinde bulunmadığı anlamına gelir. Şartname öncesinde model sayfasını açın veya veri sayfasını talep edin.
| Seri | Base | Tie width | Holding | Boyutlar |
|---|---|---|---|---|
| 4 Yönlü Yapışkanlı Kablo Bağı Bağlantıları | — | — | — | — |
Cable Tie Mount Applications
Ürün özelliklerinin kesin olarak doğrulanması gereken tipik ortamlar.
Cable Tie Mount Selection Questions
Detaylı devre doğrulamasından önce ön ürün ailesi karşılaştırması için hızlı yanıtlar.
Which surfaces work with magnetic cable tie mounts?
Use a suitable ferromagnetic surface and verify performance on the actual material, coating, thickness and geometry.
Can the stated magnetic force be used as cable load?
Do not equate pull-test data directly with safe working load; direction, vibration, air gap and safety factors affect the installation.
Can they be used overhead?
Only after engineering review of the actual surface, load, environment and required secondary retention.
Which cable tie fits?
Match tie width and thickness to the mount slot and confirm bundle diameter and material requirements.
Do coatings affect holding?
Yes. Paint, powder coating, contamination and uneven surfaces can create an air gap and reduce magnetic holding.
Need Magnetic Cable Tie Mounts?
Let’s Match the Surface and Bundle.
Send the surface material, coating, bundle load, tie size, environment, quantity and installation orientation.
Request Cable Tie Mount Support