Магнитные крепления для кабельных стяжек Производитель
Compare VIOX cable tie mounting solutions for organizing cables on suitable steel surfaces and equipment without permanent drilling.
Surface matchingVerify magnetic substrate
Cable loadBundle and routing forces
Mount geometryTie slot and orientation
Окружающая средаVibration, heat and corrosion
What is a magnetic cable tie mount?
A magnetic cable tie mount combines a magnetic base with a tie attachment point so cable bundles can be routed on suitable ferromagnetic surfaces without drilling an attachment hole.
The mount must be selected from surface material and condition, magnetic holding data, bundle load and direction, tie compatibility, vibration, temperature, corrosion exposure and required installation permanence.
Cable Tie Mount Series Overview
Сравните опубликованные модели VIOX, используя факты, уже имеющиеся в данных о продукте.
How to choose a magnetic cable tie mount
Start with the mounting surface and load direction, then verify holding, tie and environmental requirements.
Surface material and condition
Paint, coatings, curvature, contamination and steel thickness can affect holding.
Bundle load and direction
Account for cable weight, pulling force, vibration and vertical or overhead use.
Tie-slot compatibility
Match tie width, orientation, bundle diameter and routing geometry.
Environment and permanence
Check temperature, corrosion, movement and whether secondary retention is required.
Verify the real installed holding condition
Magnet performance depends on the actual surface, air gap, load direction and environment.
Compare published Cable Tie Mount series
Пустые ячейки означают, что значение недоступно в текущем обзоре продукции. Откройте страницу модели или запросите технический паспорт перед составлением спецификации.
| Серия | Base | Tie width | Holding | Размеры |
|---|---|---|---|---|
| 4-сторонние клейкие крепления для кабельных стяжек | — | — | — | — |
Cable Tie Mount Applications
Типовые условия эксплуатации, требующие проверки точных характеристик изделия.
Промышленная автоматизация
Repositionable cable routing on suitable steel machine surfaces.
Центры обработки данных и телекоммуникации
Temporary or adjustable cable organization on compatible equipment surfaces.
Сборка электрощитового оборудования и распределение электроэнергии
Cable routing around steel panels where the holding condition is verified.
Cable Tie Mount Selection Questions
Быстрые ответы для предварительного сравнения семейств продуктов перед детальной проверкой цепи.
Which surfaces work with magnetic cable tie mounts?
Use a suitable ferromagnetic surface and verify performance on the actual material, coating, thickness and geometry.
Can the stated magnetic force be used as cable load?
Do not equate pull-test data directly with safe working load; direction, vibration, air gap and safety factors affect the installation.
Can they be used overhead?
Only after engineering review of the actual surface, load, environment and required secondary retention.
Which cable tie fits?
Match tie width and thickness to the mount slot and confirm bundle diameter and material requirements.
Do coatings affect holding?
Yes. Paint, powder coating, contamination and uneven surfaces can create an air gap and reduce magnetic holding.
Need Magnetic Cable Tie Mounts?
Let’s Match the Surface and Bundle.
Send the surface material, coating, bundle load, tie size, environment, quantity and installation orientation.
Request Cable Tie Mount Support