Pangkalahatang-ideya
VIOX KCQJ7 motor controllers combine motor switching, overload
protection and phase-loss protection in an IP55 enclosure with
start/stop buttons and status indicators. The range supports motors up
to 18.5 kW at 380 V, with model-specific current setting ranges up to 38
A.
Versions and Features
| Bersyon | Function |
|---|---|
| KCQJ7 | Motor start/stop control with overload and phase-loss proteksyon |
| KCQJ7-W | Adds liquid-level relay control for automatic water pumping and draining |
- CJX2s contactor with a matched JD-8 motor protector.
- Front-panel start/stop buttons and circuit-status indicators.
- AC 220 V or AC 380 V control supply options.
- Detachable cover and connector-based wiring for maintenance
access.
Liquid-level control is intended for suitable conductive water
applications such as water tanks and reservoirs. It is not suitable for
low-conductivity liquids such as petroleum or purified water, flammable
or explosive chemical liquids, or high-density sewage.
Teknikal na Pagtutukoy
| Kasalukuyang hanay ng setting | Rated frame current | AC-3 power at 380 V | AC-3 power at 220 V | Contactor |
|---|---|---|---|---|
| 0.72–2.4 A | 2.4 A | 1.1 kW | 0.55 kW | CJX2s-09 |
| 3.5–11 A | 12 A | 5.5 kW | 3 kW | CJX2s-12 |
| 10–16 A | 16 A | 7.5 kW | 4 kW | CJX2s-18 |
| 20–25 A | 25 A | 11 kW | 5.5 kW | CJX2s-25 |
| 30–38 A | 38 A | 18.5 kW | 9 kW | CJX2s-38 |
Select KCQJ7 or KCQJ7-W together with the required current range. The
listed ranges are separate selections, not one continuously adjustable
0.72–38 A device.
| Parameter | Pagtutukoy |
|---|---|
| Main-circuit voltage described in application section | AC 380 V |
| Dalas | 50 Hz o 60 Hz |
| Control supply options | AC 220 V; AC 380 V |
| Proteksyon ng enclosure | IP55 |
| Phase-loss operating time | ≤5 s under the specified three-phase monitoring condition |
| Liquid-level electrode lead distance | Up to 200 m for applicable liquid-level configuration |
| Temperatura sa paligid | −5°C to +40°C; 24-hour average ≤+35°C |
| Installation altitude | ≤2000 m |
| Degree ng polusyon | 3 |
| Kategorya ng pag-install | II |
Configure the motor protector for the motor nameplate current before
commissioning. Frame current, protector adjustment range and motor
operating current are distinct selection values. Motor overload
protection does not replace coordinated short-circuit protection.
Wiring and Dimensions
The supplied sheet shows KCQJ7 and KCQJ7-W circuits with a 380 V main
supply and either 380 V or 220 V control supply. Match the diagram to
the supplied version and control voltage. The enclosure maximum outline
is 118 mm wide × 200 mm high × 127 mm deep.
Impormasyon sa Pag-order
Specify KCQJ7 or KCQJ7-W, motor voltage and power, motor nameplate
current, required current setting range, control supply voltage,
liquid-level control requirements and quantity.
