24V AC Button Photocell Sensor

VIOX 24V AC Button Photocell Sensor

Tổng quan

The VIOX 24V AC Button Photocell Sensor is a highly reliable and efficient lighting control device designed for 24-volt lighting applications. This sensor is ideal for use with Solar, Induction, LED, and CFL lighting systems. It features a fixed position mount and is designed to fit into compatible light fixtures or standard outlet boxes. The VIOX dusk-to-dawn photocell ensures energy efficiency by automatically turning lights on at dusk and off at dawn based on ambient light levels.

Các tính năng chính

• Automatic Lighting Control: Automatically turns on or off the load circuit based on changes in light intensity.
• Wide Compatibility: Works well with Solar, Induction, LED, and CFL lighting systems.
• Fixed Position Mount: Designed to fit into compatible light fixtures or standard outlet boxes.
• Energy Efficient: Helps save energy by ensuring lights are only on when needed.
• Kết cấu bền bỉ: Designed for long-lasting performance with a 1-year warranty.
• Weatherproof: Must be installed in an approved weatherproof box for optimal performance.
• High Rating: Supports up to 7 Amps.

Thông số kỹ thuật

Ứng dụng

The VIOX 24V AC Button Photocell Sensor is ideal for a variety of applications, including street lighting, gardens, parks, and other outdoor lighting systems. Its robust design and reliable performance make it suitable for both commercial and industrial environments.

Dữ liệu kỹ thuật

• Voltage: 24VAC
• Đánh giá: 7 Amps
• Turn On: 1-3 Footcandles
• Time Delay: 1-5 Seconds
• Kích thước: 1 1/8″W x 2″H x 1 3/4″D
• Mount Type: Fixed Position
• Warranty: 1 Year Limited
• Switch Type: SPST
• Type of Protection: IP 53
• Ambient Temperature: -10℃ ~ +50℃
• Ambient Humidity: 35 ~ 85% RH

Tips To Optimize Photocell Performance

• Do not face the photocell into the midday sun. If installed on the south side of a building, face the photocell east or west or point it down toward the ground. The best direction is north.
• Do not face the photocell where it can see artificial light, such as from windows, signs, or street lights, as this will cause the photo control not to switch on.
• Ensure the photocell is installed in an approved weatherproof box and not with wires up unless there is no possibility of water entering around the wires.
• When testing the photocell, turn on the power and wait up to 5 minutes for the photocell to switch the load off. For further testing, cover the photo control completely with black tape or another dark material to simulate night conditions.