24V DC fotobunkový snímač súmraku do úsvitu

VIOX 24V DC Dusk-To-Dawn Photocell Sensor

Prehľad

The VIOX 24V DC Dusk-To-Dawn Photocell Sensor is a highly reliable and efficient lighting control device designed for 24-volt lighting applications. This sensor is ideal for use with Solar, Induction, LED, and CFL lighting systems. It features a stem mount swivel design, allowing for optimal positioning of the light-sensitive element. The VIOX dusk-to-dawn photocell ensures energy efficiency by automatically turning lights on at dusk and off at dawn based on ambient light levels.

Kľúčové vlastnosti

• Automatic Lighting Control: Automatically turns on or off the load circuit based on changes in light intensity.
• Wide Compatibility: Works well with Solar, Induction, LED, and CFL lighting systems.
• Stem Mount Swivel Design: Allows for flexible positioning to achieve the best operating position.
• Energetická účinnosť: Helps save energy by ensuring lights are only on when needed.
• Odolná konštrukcia: Designed for long-lasting performance with a 1-year warranty.
• Weatherproof: Must be installed in an approved weatherproof box for optimal performance.
• High Rating: Supports up to 7 Amps.

Špecifikácie

Aplikácie

The VIOX 24V DC Dusk-To-Dawn Photocell Sensor is ideal for a variety of applications, including street lighting, gardens, parks, and other outdoor lighting systems. Its robust design and reliable performance make it suitable for both commercial and industrial environments.

Technické údaje

• Napätie: 24VDC
• Rating: 7 Amps
• Turn On: 1-3 Footcandles
• Time Delay: 1-5 Seconds
• Rozmery: 3 1/2″L x 1 1/4″W x 1/4″D
• Mount Type: Swivel Mount
• Warranty: 1 Year Limited
• Typ spínača: SPST
• Type of Protection: IP 53
• Okolitá teplota: -10℃ ~ +50℃
• Okolitá vlhkosť: 35 ~ 85% RH

Schéma zapojenia

Tips To Optimize Photocell Performance

• Do not face the photocell into the midday sun. If installed on the south side of a building, face the photocell east or west or point it down toward the ground. The best direction is north.
• Do not face the photocell where it can see artificial light, such as from windows, signs, or street lights, as this will cause the photo control not to switch on.
• Ensure the photocell is installed in an approved weatherproof box and not with wires up unless there is no possibility of water entering around the wires.
• When testing the photocell, turn on the power and wait up to 5 minutes for the photocell to switch the load off. For further testing, cover the photo control completely with black tape or another dark material to simulate night conditions.